D-Link DGS-1210-28XS/ME [434/519] Disable ipif_ipv6_link_local_auto

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide

416

To configure the retrans_time of IPv6 ND neighbor solicitation to be 100:

DGS-1210-28MP/ME:5# config ipv6 nd ns ipif System retrans_time 100

Command: config ipv6 nd ns ipif System retrans_time 100

Success.

DGS-1210-28MP/ME:5#

enable ipif_ipv6_link_local_auto

Purpose Used to enable the autoconfiguration of the link local address when

no IPv6 address is configured.

Syntax

enable ipif_ipv6_link_local_auto <ipif_name 12>

Description

This enable ipif_ipv6_link_local_auto command will automatically

create an IPv6 link local address for the Switch if no IPv6 address

has previously been configured.

Parameters <ipif_name 12> - Specifies the name.

Restrictions Only Administrator or operator-level users can issue this command.

Example usage:

To enable the IP interface IPv6 link-local settings on the switch:

DGS-1210-28MP/ME:5# enable ipif_ipv6_link_local_auto System

Command: enable ipif_ipv6_link_local_auto System

Success.

DGS-1210-28MP/ME:5#

disable ipif_ipv6_link_local_auto

Purpose Used to disable the autoconfiguration of the IPv6 link local address.

Syntax

disable ipif_ipv6_link_local_auto <ipif_name 12>

Description

This disable ipif_ipv6_link_local_auto command will disable the

automatic creation of an IPv6 link local address for the Switch. Once

this command is entered, any previous IPv6 link local address that

has been created for the IP interface selected will be deleted from

the switch.

Parameters <ipif_name 12> - Specifies the name.

Restrictions Only Administrator or operator-level users can issue this command.

Example usage:

To disable the IP interface IPv6 link-local settings on the switch: