AXIOMET AX-EL300W60A Расширенная инструкция онлайн [50/72] 527990

together with “ ”, “ ” keys to input time to 1s, and press “Enter” key to confirm. /// NO 00.

13 /// Use “↑”, “↓” keys to select the basic mode. Use Entry keys or the knob to select operating mode to

CCL, and press “Enter” key to confirm. /// MODE CCL

14 /// Use “↑”, “↓” keys to select the set value. Use Entry keys or the knob together with “ ”, “ ” keys to

input the current value to 1A, and press “Enter” key to confirm. /// LEVEL 01.000A

15 /// Use “↑”, “↓” keys to select the set time. Use Entry keys or the knob together with “ ”, “ ” keys to

input the time value to 1s, and press “Enter” key to confirm. /// DELAY 01.000S

16 /// Repeat the procedures 12 to 14 to set the rest four steps. ///

17 /// The five sequence steps have been edited, and there is no need to edit the step6. Press “Cancel” key

to exit step edit screen and save the sequence data in EEPROM assigned by the sequence number. ///

18 /// Use “↑”, “↓” keys to select “Count”. use Entry keys or the knob together with “ ”, “ ” keys to input

“5”. Press “Enter” key to confirm and save the Count value in EEPROM assigned by the sequence number.

/// SAVE

19 /// Use “↑”, “↓” keys to select “Chain”. use Entry keys (the “Chain” is OFF when the Entry key exceeds

7) or the knob to input “Off”. Press “Enter” key to confirm and save the Chain value in EEPROM assigned

by the sequence number. /// COUNT 0005

20 /// Press “Cancel” key to exit sequence operation menu and enter into the sequence operating screen.

/// CHAIN 0

21 /// Press “Shift”+“4Start” keys to activate sequence operation. ///

22 /// Press “Shift”+“5Stop” keys to stop sequence operation. ///

For the above operating procedures, the corresponding SCPI commands should be:

LIST:NUMBer 0 ; Recalls the sequence of the number 0

LIST:MEMO ”Test Power” ; Sequence memo is “Test Power”

LIST:ADD CCL,1,1

LIST:ADD CCH,2,1

LIST:ADD CVH,1,1

LIST:ADD CRL,1,1

LIST:ADD CRH,200,1 ; The above 5 commands are sequence steps

LIST:SAVE ; Saves the sequence

LIST:COUNT 5 ; Cycle times for this sequence

LIST:CHAIN OFF ; Disables the chained sequence

LIST ON ; Activates sequence operation

LIST OFF ; Stops sequence operation

5.8.2. Modifying, Adding, Inserting, Deleting the Sequence (List)

Exampe: Based on the example in 5.8.1 section, the step1: modify the time to 2s. Add “CCH, 5A, 1s” to

the last step. Insert “CRL, 1Ω, 10s” at step3. Delete step2. The sequence is chained to itself to realize the

continuous execution