D-Link DNS-320 [23/117] When first powered on during the initial boot sequence the device will wait to be assigned an ip address via dhcp if it does not receive a dhcp assigned ip address the auto ip...

20D-Link DNS-320 User Manual

Section 3 - Installation

When rst powered on, during the initial boot sequence, the device will wait to be assigned an IP address via DHCP. If it does

not receive a DHCP assigned IP address the Auto-IP process will assign a 169.254.xxx.xxx address to the device If you want to

change the IP address before logging in or are unable to connect to the ShareCenter Pulse IP address, you can use the Storage

Utility provided on the product CD to locate the device on your network and make any needed changes.

D-Link Storage Utility

Network Storage

Device:

Refresh:

Conguration:

LAN:

Apply:

Drive Mapping:

Available Drive

Letters:

About:

Exit:

The D-Link Storage Utility displays any ShareCenter Pulse devices it

detects on the network.

Click to refresh the device list.

Click Configuration to access the Web-based configuration of the

ShareCenter Pulse.

Congure the LAN Settings for the ShareCenter Pulse here.

Click Apply to save and activate the changes to the LAN Settings.

Volumes available for mapping are displayed here.

Select an available drive letter. Click Connect to map the selected volume.

Click Disconnect to disconnect the selected mapped volume.

Click About to view the software version of the D-Link Storage Utility.

Click Exit to close the utility.