D-Link DNS-320 [32/117] To setup the hard drive raid configuration of your sharecenter pulse click on the management tab and then the disk management icon select the hard drive configuration menu item...

D-Link DNS-320 [32/117] To setup the hard drive raid configuration of your sharecenter pulse click on the management tab and then the disk management icon select the hard drive configuration menu item...
29D-Link DNS-320 User Manual
Section 4 - Conguration
Disk Management
Hard Drive Conguration
To setup the Hard Drive RAID conguration of your ShareCenter Pulse, click on the Management tab and then the Disk
Management icon. Select the Hard Drive Conguration menu item on the left of the window. This menu will allow you set the
RAID type and format your hard drives.
Hard Drive:
Conguration
Your ShareCenter Pulse hard drive can be congured
and formatted in various congurations here.
Current Raid Type: If the drives are already formatted the conguration
will be displayed here.
Set RAID type and
Re-Format:
Click on this button to launch a wizard to allow you to
select the RAID conguration and format the drives.
Refer to the section titled What is RAID?” on page 98.
for more information about RAID.
Auto-Rebuild
Conguration:
If you selected RAID 1 as the conguration option
then set the Auto-Rebuild function here using the
radio buttons.
Enable Auto-Rebuild: Enabling Auto-Rebuild will rebuild a failed RAID 1
drive when a new drive has replaced the degraded
one.
Disable Auto-Rebuild: If you do not want to automatically rebuild drives
after a failure when using the RAID 1 functionality
then you can check this option.
Note: You can still rebuild a drive using the RAID 1
functionality however you must initiate the rebuild
manually.
Manual Rebuild Now: If you have disabled Auto-Rebuild then you can use
the Manual Rebuild option by clicking this button.

Содержание