Moxa ioLogik 2542 [32/88] Cellular iologik 2500 gprs hspa only

ioLogik 2500 Series Offline Configuration Management

4-7

If Server Socket Idle Connection Timeout is enabled: When the server’s connection to the ioLogik 2500

exceeds the specified time period the device will automatically release its TCP connection to the server to

free up the port for the next connection.

If Server Socket Idle Connection Timeout is not enabled: If the network host is unable to respond due

to a hardware failure or network problem, the ioLogik will continue to wait for a response from the host,

causing the TCP port to be occupied indefinitely by the host.

Private IP for the First Expansion Module

An array of up to 8 modules can be connected to the

ioLogik 2500.

Private IP for First Expansion Module

assigns an IP to the first E1200

module. The IPs for

subsequent

modules in the chain will be automatically

assigned consecutively. For e

xample, if the IP of the first

E1200 device is set to 192.168.120.1, the IP of the second

E1200 will be 192.168.120.2, the third IP will be

192.168.120.3, and so on.

LAN

IP Settings

You can set up a static or dynamic IP address

for the ioLogik, as wel

l as the subnet mask

and gateway address.

Use this field to specify the IP addresses of

one or two DNS servers. DNS servers can be

used to find available e

-mail addresses when

setting up Click&Go

Plus rules.

NOTE

The

ioLogik 2500-WL1 only supports static IP addresses.

Cellular (ioLogik 2500-GPRS/HSPA only)

Cellular is only available for the ioLogik 2500-GPRS/HSPA models. See Chapter 4: Cellular Network

Setup and Configuration for details.

Wi-Fi (ioLogik 2500-WL1 Only)

Wi-Fi is only available for the ioLogik 2500-WL1 models. See Chapter 5: Wireless LAN Network Setup

and Configuration for details.