Gorenje VS 110W [25/64] Operating instructions

Gorenje VS 110W [25/64] Operating instructions
24
Sketch for operating instructions
Step 1: Put the bag opening to below of the air
portal.
1. Seal only
2. Indicator Lamp (for seal)
3. Cancel
4. Indicator Lamp (for vacum)
5. Vacum / seal
Step 2: Press for lock.
Step 3: Press for release
OPERATING INSTRUCTIONS
Making a bag using the bag roll
1. Plug the unit into 220-240V~ power Source, and
turn the switch ―ON‖;
2. Unroll the bag and put one end of the bag on top
of the black rubber strip, then close the cover
See sketch #1;
3. Press the cover down heavily on both sides by the
lines areas using two hands until two click
sounds heard. (See sketch step 2);
4. Press the ―Seal Only‖ button and you will find the
red LED will light ;
5. When the LED light disappears, the bag seal is
done;
6. Then pull out the bag roll and cut to your desired
bag length. The bag is ready.
Preserve stuff with vacuum:
1. Put the stuff that you want to preserve inside the
bag;
2. Clean and Straighten the open end of the bag,
make sure no wrinkle or ripples on the panels of
the open ends;
3. Make sure that both panels of the bag are located
within the rippled area (vacuum plate), but below
the round post which is the vacuum pump hole to
ensure no vacuum leaking ( see sketch 3);
4. Close the cover and then press heavily on both
sides of the cover in the lines areas until two click
sounds heard!
5. Press thevacuum/sealbutton then the bag will
be automatically vacuumed and sealed.
6. When the above is done, press the two‖ Cover
Lock‖ buttons and the process is completed.
Hints for best vacuuming
performance:
1. Do not put too much stuff inside the bag: leave
enough empty length in the open end of the bag
so that the bag can be placed on the vacuuming
plate more positively;
2. Do not wet the open end of the bag. Wet bag may
be difficult to melt and seal tightly!
3. There are many non-food uses for vacuum
packing. Keep camping supplies such as matches,
first aid kits and clothing clean and dry. Keep flares
for auto emergencies ready. Keep silver and
collectibles untarnished.
4. Clean and straighten the open end of the bag
before seal the bags. Make sure nothing is leaving
on the open area of the bag, no wrinkle or creased
lines appeared on the open panels, Foreign
objects or, creased bag may cause difficulty to seal
tightly;
5. Do not leave too much air inside the bag. Press
the bag to allow extra air to escape from the bag
before vacuuming it. Too much air inside the bag
increases the vacuum pump loading and may
cause the motor insufficient power to draw away
all the air inside the bag!
6. Do not vacuum packaging objects with sharp
points like fish bones and hard shells! Sharp points
may penetrate and tear the bag!
7. Fill a bag about 2/3 full with water, seal the end
(don't vacuum). Freeze the bag and use for ice in
the cooler, or ice packs for sports injuries.
8. Suggest to vacuum seal one bag within 1 minute,
to let the appliance resume enough.
9. If it’s not reach the required vacuum for some
unknowable reason, the vacuum system will shut
automatically after 30 seconds, in this situation,
please check if the bag with leak, or the bag not
placed properly or any other reason.

Содержание

Скачать