Hitachi DS12DM [9/82] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hitachi DS12DM [9/82] English

Hitachi DS12DM [9/82] English
English
8
5) Battery tool use and care
a) Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type of battery
pack may create a risk of fire when used with
another battery pack.
b) Use power tools only with specifically designated
battery packs.
Use of any other battery packs may create a risk
of injury and fire.
c) When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal
to another.
Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
6) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
PRECAUTION
Keep children and infirm persons away.
When not in use, tools should be stored out of reach of
children and infirm persons.
PRECAUTIONS FOR CORDLESS DRIVER DRILL
1. Always charge the battery at a temperature of 10 –
40°C. A temperature of less than 10°C will result in
over charging which is dangerous. The battery
cannot be charged at a temperature higher than
40°C.
The most suitable temperature for charging is that
of 20 – 25°C.
2. When one charging is completed, leave the charger
for about 15 minutes before the next charging of
battery.
Do not charge more than two batteries
consecutively.
3. Do not allow foreign matter to enter the hole for
connecting the rechargeable battery.
4. Never disassemble the rechargeable battery and
charger.
5. Never short-circuit the rechargeable battery. Short-
circuiting the battery will cause a great electric
current and overheat. It results in burn or damage
to the battery.
6. Do not dispose of the battery in fire.
If the battery is burnt, it may explode.
7. When drilling in wall, floor or ceiling, check for
buried electric power cord, etc.
8. Bring the battery to the shop from which it was
purchased as soon as the post-charging battery life
becomes too short for practical use. Do not dispose
of the exhausted battery.
9. Using an exhausted battery will damage the charger.
10. Do not insert object into the air ventilation slots of
the charger.
Inserting metal objects or inflammables into the
charger air ventilation slots will result in electrical
shock hazard or damaged charger.
11. When mounting a bit into the keyless chuck, tighten
the sleeve adequately. If the sleeve is not tight, the
bit may slip or fall out, causing injury.
SPECIFICATIONS
POWER TOOL
Model DS9DM DS12DM
No-load speed (Low/High) 0 – 330 / 0 – 1150 min
–1
0–350 / 0 – 1200 min
–1
Wood
Drilling
(Thickness 18 mm)
21 mm 27 mm
Metal Steel: 10 mm, Steel: 13 mm,
(Thickness 1.6 mm)
Aluminum: 10 mm Aluminum: 13 mm
Machine screw 6 mm 6 mm
Driving
Wood screw
6.2 mm (diameter) × 56 mm (length) 6.8 mm (diameter) × 50 mm (length)
(Requires a pilot hole) (Requires a pilot hole)
EB9B : Ni-Cd 9.6 V (2.0 Ah, 8 cells)
EB1220BL : Ni-Cd 12 V (2.0 Ah, 10 cells)
Rechargeable battery
EB926H : Ni-MH 9.6 V (2.6 Ah, 8 cells)
EB1226HL : Ni-MH 12 V (2.6 Ah, 10 cells)
EB930H : Ni-MH 9.6 V (3.0 Ah, 8 cells)
EB1230HL : Ni-MH 12 V (3.0 Ah, 10 cells)
Weight 1.5 kg 1.7 kg
Capacity
01Eng_DS9DM_EE 08/4/28, 17:248

Содержание

Похожие устройства

English 5 Battery tool use and care a Recharge only with the charger specified by the manufacturer A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack b Use power tools only with specifically designated battery packs Use of any other battery packs may create a risk of injury and fire c When battery pack is not in use keep it away from other metal objects like paper clips coins keys nails screws or other small metal objects that can make a connection from one terminal to another Shorting the battery terminals together may cause burns or a fire d Under abusive conditions liquid may be ejected from the battery avoid contact If contact accidentally occurs flush with water If liquid contacts eyes additionally seek medical help Liquid ejected from the battery may cause irritation or burns 6 Service a Have your power tool serviced by a qualified repair person using only identical replacement parts This will ensure that the safety of the power tool is maintained PRECAUTION Keep children and infirm persons away When not in use tools should be stored out of reach of children and infirm persons PRECAUTIONS FOR CORDLESS DRIVER DRILL 1 Always charge the battery at a temperature of 10 40 C A temperature of less than 10 C will result in over charging which is dangerous The battery cannot be charged at a temperature higher than 40 C The most suitable temperature for charging is that of 20 25 C 2 When one charging is completed leave the charger for about 15 minutes before the next charging of battery Do not charge more than two batteries consecutively 3 Do not allow foreign matter to enter the hole for connecting the rechargeable battery 4 Never disassemble the rechargeable battery and charger 5 Never short circuit the rechargeable battery Short circuiting the battery will cause a great electric current and overheat It results in burn or damage to the batte ry 6 Do not dispose of the battery in fire If the battery is burnt it may explode 7 When drilling in wall floor or ceiling check for buried electric power cord etc 8 Bring the battery to the shop from which it was purchased as soon as the post charging battery life becomes too short for practical use Do not dispose of the exhausted battery 9 Using an exhausted battery will damage the charger 10 Do not insert object into the air ventilation slots of the charger Inserting metal objects or inflammables into the charger air ventilation slots will result in electrical shock hazard or damaged charger 11 When mounting a bit into the keyless chuck tighten the sleeve adequately If the sleeve is not tight the bit may slip or fall out causing injury SPECIFICATIONS POWER TOOL Model No load speed Low High DS9DM DS12DM 0 330 0 1150 min 1 0 350 0 1200 min Wood Thickness 18 mm 21 mm Metal Thickness 1 6 mm Steel 10 mm Aluminum 10 mm 27 mm Drilling Capacity Machine screw Driving Rechargeable battery Weight Wood screw Steel 13 mm Aluminum 13 mm 6 mm 6 mm 6 2 mm diameter x 56 mm length Requires a pilot hole 6 8 mm diameter x 50 mm length Requires a pilot hole EB9B Ni Cd 9 6 V 2 0 Ah 8 cells EB926H Ni MH9 6 V 2 6 Ah 8 cells EB930H Ni MH9 6 V 3 0 Ah 8 cells 1 5 kg EB1220BL Ni Cd 12 V 2 0 Ah 10 cells EB1226HL Ni MH12 V 2 6 Ah 10 cells EB1230HL Ni MH12 V 3 0 Ah 10 cells 1 7 kg 8

Скачать