Alinco DJ-G7 [55/58] Reset functions 14 maintenance and reference

Содержание

13 Reset Functions 14 Maintenance and Reference 13 Reset Functions Please be careful Data deleted from the memory mode cannot be recovered There are two types of reset functions in this transceiver a partial reset function that initializes only the display and the all reset function that deletes memory data 13 1 Partial Reset This function doesn t initialize memory data but returns the transceiver to Its factory settings This function is used when the transceiver is not operating properly or if the operator is confused about the transceiver s current condition I Turn the transceiver off 14 Maintenance and Reference 14 1 Troubleshooting The following symptoms are not malfunctions please check the possible causes and take proper actions If a problem persists please reset the unit Problems with settings and CPU related difficulties are often resolved by a reset Symptom Nothing appears on the display when turning on the power No speaker audio 2 Turn the transceiver on while pressing the key 3 When Reset completed is displayed release the key Possible Cause Poor battery pack connection Battery is exhausted You are releasing the power key too quickly The PTT key is pressed Volume too low Squelch level too high Tone squelch is on DCS in on You are pressing the PTT key and transmitting The mute function Is on CPU error Won t scan Squelch is unmuted Frequency and memory channel number don t change Key entry not possible Key lock is on Release the mute function Remove the external power supply and the battery pack wait for more than 10 seconds and attach them again If the trouble isn t resolved by following these steps reset the unit Refer to Memory Name Function Set squelch so that noise mutes Turn off Key lock Key lock is on Turn off Key lock Frequency display is incorrect 13 2 All Reset V_ This function is only for limited use such as resetting all memory data STEP 1 Press the strand vg keys in order while turning the transceiver on A channel name is set 2 When All reset completed is displayed release the key The transceiver will return to the default VFO mode 108 Action Remove dirt or corrosion from the battery pack terminals Recharge or replace the batteries in the dry cell case Hold the power key down until the display appears Release the PTT key Adjust the audio level Adjust the squelch level Turn off tone squelch Turn off DCS Release the PTT key 109

Скачать