![D-Link DIR-815 [34/123] Click the save settings button to save any changes made](/img/pdf.png)
D-Link DIR-815 [34/123] Click the save settings button to save any changes made
![D-Link DIR-815 [34/123] Click the save settings button to save any changes made](/views2/1044559/page34/bg22.png)
29D-Link DIR-815 User Manual
Section 3 - Conguration
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
The DNS server information will be supplied by your ISP (Internet Service Provider).
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1454 is the default
MTU.
The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to
replace the Internet port’s MAC address with the MAC address of your Ethernet card.
MaximumIdle
Time:
DNS Servers:
MTU:
MAC Address:
Click the Save Settings button to save any changes made.
Содержание
- All rights reserved this publication may not be reproduced in whole or in part without prior expressed written permission from d link systems inc 2
- Copyright 2010 by d link systems inc 2
- D link and the d link logo are trademarks or registered trademarks of d link corporation or its subsidiaries in the united states or other countries all other company or product names mentioned herein are trademarks or registered trademarks of their respective companies 2
- D link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes 2
- Manual revisions 2
- Preface 2
- Trademarks 2
- Table of contents 3
- Cd rom with manual and setup wizard 6
- Dir 815 wireless n dual band router 6
- Ethernet cable 6
- Package contents 6
- Power adapter 6
- Product overview 6
- System requirements 7
- Introduction 8
- Total coverage 8
- Total network security 8
- Total performance 8
- Total security 8
- Ultimate performance 8
- Features 9
- 2 3 4 5 10
- Connections 10
- Hardware overview 10
- Hardware overview 11
- Wps button 11
- 2 3 4 5 12
- D link dir 815 user manual 12
- Hardware overview 12
- Section 1 product overview 12
- Before you begin 13
- Installation 13
- Wireless installation considerations 14
- Connect to cable dsl satellite modem 15
- Connect to another router 16
- Getting started 18
- Configuration 19
- Web based configuration utility 19
- Internet 20
- This section allows you to configure your router s internet settings 20
- Internet connection setup wizard 21
- Manual internet connection setup 28
- Click the save settings button to save any changes made 29
- Manual internet connection setup 29
- Select static ip from the drop down menu if all the internet port s ip information is provided to you by your isp you will need to enter in the ip address subnet mask gateway address and dns address es provided to you by your isp each ip address entered in the fields must be in the appropriate ip form which are four octets separated by a dot x x x x the router will not accept the ip address if it is not in this format 29
- Static ip 29
- Click the save settings button to save any changes made 30
- Dynamic ip dhcp 30
- Manual internet connection setup 30
- Select dynamic ip dhcp from the drop down menu to obtain ip address information automatically from your isp select this option if your isp does not give you any ip numbers to use this option is commonly used for cable modem services such as comcast and cox 30
- Manual internet connection setup 31
- Pppoe username password 31
- Select pppoe username password from the drop down menu if your isp uses a pppoe connection your isp will provide you with a username and password this option is typically used for dsl services make sure to remove your pppoe software from your computer the software is no longer needed and will not work through a router 31
- Click the save settings button to save any changes made 32
- Manual internet connection setup 33
- Select pptp point to point tunneling protocol from the drop down menu if your isp uses a pptp connection your isp will provide you with a username and password this option is typically used for dsl services 33
- Click the save settings button to save any changes made 34
- Choose l2tp layer 2 tunneling protocol if your isp uses a l2tp connection your isp will provide you with a username and password this option is typically used for dsl services 35
- Manual internet connection setup 35
- Click the save settings button to save any changes made 36
- Manual internet connection setup 37
- Russia pptp dual access 37
- Select pptp point to point tunneling protocol from the drop down menu if your isp uses a pptp connection your isp will provide you with a username and password this option is typically used for dsl services 37
- Click the save settings button to save any changes made 38
- Manual internet connection setup 39
- Russia pppoe dual access 39
- Select pppoe username password from the drop down menu if your isp uses a pppoe connection your isp will provide you with a username and password this option is typically used for dsl services make sure to remove your pppoe software from your computer the software is no longer needed and will not work through a router 39
- Click the save settings button to save any changes made 40
- Wireless settings 41
- 1n b g 2 ghz 42
- Click the save settings button to save any changes made 42
- Manual wireless settings 42
- 1n a 5ghz 43
- Click the save settings button to save any changes made 43
- Network settings 44
- This section will allow you to change the local network settings of the router and to configure the dhcp settings 44
- Click the save settings button to save any changes made 45
- Network settings 45
- Router settings 45
- Dhcp server settings 46
- Dhcp stands for dynamic host control protocol the dir 815 has a built in dhcp server the dhcp server will automatically assign an ip address to the computers on the lan private network be sure to set your computers to be dhcp clients by setting their tcp ip settings to obtain an ip address automatically when you turn your computers on they will automatically load the proper tcp ip settings provided by the dir 815 the dhcp server will automatically allocate an unused ip address from the ip address pool to the requesting computer you must specify the starting and ending address of the ip address pool 46
- Network settings 46
- When you have finished configuring the new dhcp server settings click the save settings button at the top or bottom of the window 46
- Dhcp reservation 47
- If you want a computer or device to always have the same ip address assigned you can create a dhcp reservation the router will assign the ip address only to that computer or device 47
- Network settings 47
- Note this ip address must be within the dhcp ip address range 47
- When you have finished configuring the new dhcp reservation click the save settings button at the top or bottom of the window to activate your reservations 47
- Advanced 48
- Virtual server 48
- Click the save settings button to save any changes made 49
- The virtual server window allows you to open a single port if you would like to open a range of ports refer to the next page 49
- Click the save settings button to save any changes made 50
- Port forwarding 50
- This will allow you to open a single port or a range of ports 50
- Application rules 51
- Click the save settings button to save any changes made 51
- Some applications require multiple connections such as internet gaming video conferencing internet telephony and others these applications have difficulties working through nat network address translation special applications makes some of these applications work with the dir 815 if you need to run applications that require multiple connections specify the port normally associated with an application in the trigger port field select the protocol type as tcp or udp then enter the firewall public ports associated with the trigger port to open them for inbound traffic 51
- Click the save settings button to save any changes made 52
- Qos engine 52
- The qos engine option helps improve your network gaming performance by prioritizing applications by default the qos engine settings are disabled and application priority is not classified automatically 52
- Click the save settings button to save any changes made 53
- Network filter 53
- Use mac media access control filters to allow or deny lan local area network computers by their mac addresses from accessing the network you can either manually add a mac address or select the mac address from the list of clients that are currently connected to the broadband router 53
- Click the save settings button to save any changes made 54
- Website filter 54
- Website filters are used to allow you to set up a list of web sites that can be viewed by multiple users through the network to use this feature select the appropriate web filtering option enter the domain or website and click save settings 54
- A firewall protects your network from the outside world the dir 815 offers a firewall type functionality the spi feature helps prevent cyber attacks sometimes you may want a computer exposed to the outside world for certain types of applications if you choose to expose a computer you can enable dmz dmz is short for demilitarized zone this option will expose the chosen computer completely to the outside world 55
- Firewall settings 55
- Firewall rules 56
- Firewall settings 56
- Use the firewall rules section to create modify firewall rules 56
- When you have finished configuring the firewall rules click the save settings button at the top or bottom of the window to save any changes made 57
- Click the save settings button to save any changes made 58
- Routing 58
- The routing option is an advanced method of customizing specific routes of data through your network 58
- 1n b g 2 ghz 59
- Advanced wireless settings 59
- Click the save settings button to save any changes made 59
- 1n a 5ghz 60
- Advanced wireless settings 60
- Click the save settings button to save any changes made 60
- Wi fi protected setup wps 61
- Wi fi protected setup wps system is a simplified method for securing your wireless network during the initial setup as well as the add new device processes the wi fi alliance wfa has certified it across different products as well as manufactures the process is just as easy as depressing a button for the push button method or correctly entering the 8 digit code for the pin code method the time reduction in setup and ease of use are quite beneficial while the highest wireless security setting of wpa2 is automatically used 61
- Click the save settings button to save any changes made 62
- Advanced network 63
- Click the save settings button to save any changes made 63
- Internet ping block 63
- Internet port speed 63
- Multicast streams 63
- Use the ipv6 window to configure the mode that the router will use to access an ipv6 internet connection 64
- Click the save settings button to save any changes made 65
- Select staticipv6 from the myipv6connectionis drop down menu if your router will use a static ipv6 address to connect to the internet 65
- Static ipv6 65
- Staticipv6 65
- Click the save settings button to save any changes made 66
- Static ipv6 stateless 66
- Staticipv6 stateless 66
- To configure the router to use a static ipv6 stateless connection configure the parameters in the lan address autoconfiguration settings section as described below 66
- Click the save settings button to save any changes made 67
- Static ipv6 stateful 67
- Staticipv6 stateful 67
- To configure the router to use a static ipv6 stateful connection configure the parameters in the lan address autoconfiguration settings section as described below 67
- Click the save settings button to save any changes made 68
- Dhcpv6 stateful 68
- Select staticipv6 from the myipv6connectionis drop down menu if your router will use a static ipv6 address to connect to the internet 68
- Click the save settings button to save any changes made 69
- Dhcpv6 stateful stateless autoconfiguration 69
- Dhcpv6 stateful statelessautoconfiguration 69
- To configure the router to use a static ipv6 stateless connection configure the parameters in the lan address autoconfiguration settings section as described below 69
- Click the save settings button to save any changes made 70
- Dhcpv6 stateful stateful autoconfiguration 70
- Dhcpv6 stateful statefulautoconfiguration 70
- To configure the router to use a static ipv6 stateful connection configure the parameters in the lan address autoconfiguration settings section as described below 70
- Click the save settings button to save any changes made 71
- Select 6to4 from the myipv6connectionis drop down menu if your router will use an ipv6 to ipv4 tunnel to connect to the internet 71
- Click the save settings button to save any changes made 72
- To configure the router to use an ipv6 to ipv4 tunnel stateless autoconfiguration connection configure the parameters in the lan address autoconfiguration settings section as described below 72
- To4 stateless autoconfiguration 72
- To4 statelessautoconfiguration 72
- Click the save settings button to save any changes made 73
- To configure the router to use an ipv6 to ipv4 tunnel stateful autoconfiguration connection configure the parameters in the lan address autoconfiguration settings section as described below 73
- To4 stateful dhcpv6 autoconfiguration 73
- Link local only 74
- Click the save settings button to save any changes made 75
- Ipv6 firewall 75
- Ipv6firewall 75
- The dir 815 s ipv6 firewall feature allows you to configure which kind of ipv6 traffic is allowed to pass through the device the dir 815 s ipv6 firewall functions in a similar way to the ip filters feature 75
- Click the save settings button to save any changes made 76
- This page will allow you to change the administrator password and configure the authentication settings this window also allows you to enable remote management via the internet 76
- Click the save settings button to save any changes made 77
- The time window allows you to configure update and maintain the correct time on the internal system clock from this section you can set the time zone that you are in and set the time server daylight saving can also be configured to automatically adjust the time when needed 77
- Click the save settings button to save any changes made 78
- Email settings 78
- The email feature can be used to send the system log files and router alert messages to your email address 78
- System 79
- This section allows you to manage the router s configuration settings reboot the router and restore the router to the factory default settings restoring the unit to the factory default settings will erase all settings including any rules that you ve created 79
- Firmware 80
- Use the firmware window to upgrade the firmware of the router and install language packs if you plan to install new firmware make sure the firmware you want to use is on the local hard drive of the computer if you want to install a new language pack make sure that you have the language pack available please check the d link support site for firmware updates at http support dlink com you can download firmware upgrades to your hard drive from the d link support site 80
- Click the save settings button to save any changes made 81
- Dynamic dns 81
- The ddns feature allows you to host a server web ftp game server etc using a domain name that you have purchased www whateveryournameis com with your dynamically assigned ip address most broadband internet service providers assign dynamic changing ip addresses using a ddns service provider your friends can enter in your domain name to connect to your server no matter what your ip address is 81
- System check 82
- Schedules 83
- Schedules can be created for use with enforcing rules for example if you want to restrict web access to mon fri from 3pm to 8pm you could create a schedule selecting mon tue wed thu and fri and enter a start time of 3pm and end time of 8pm 83
- Device info 84
- Status 84
- The router automatically logs records events of possible interest in it s internal memory if there isn t enough internal memory for all events logs of older events are deleted but logs of the latest events are retained the logs option allows you to view the router logs you can define what types of events you want to view and the level of the events to view this router also has external syslog server support so you can send the log files to a computer on your network that is running a syslog utility 85
- Statistics 86
- The screen below displays the traffic statistics here you can view the amount of packets that pass through the dir 815 on both the wan lan ports and both the 802 1n g 2 ghz and 802 1n a 5ghz wireless bands the traffic counter will reset if the device is rebooted 86
- Internet sessions 87
- The internet sessions page displays full details of active internet sessions through your router an internet session is a conversation between a program or application on a lan side computer and a program or application on a wan side computer 87
- The wireless client table displays a list of current connected wireless clients this table also displays the connection time and mac address of the connected wireless clients 88
- Wireless 88
- The ipv6 page displays a summary of the router s ipv6 settings and lists the ipv6 address and host name of any ipv6 clients 89
- Support 90
- What is wpa 91
- Whatiswpa 91
- Wireless security 91
- Wireless connection setup wizard 92
- Wireless security setup wizard 93
- Add wireless device with wps wizard 95
- Configure wep 96
- Configure wpa wpa2 personal psk 97
- Configurewpa wpa2 personal psk 97
- Configure wpa wpa2 enterprise radius 98
- Configurewpa wpa2 enterprise radius 98
- Click on the wireless icon in your system tray lower right corner 99
- Connect to a wireless network 99
- It is recommended to enable wireless security wpa wpa2 on your wireless router or access point before configuring your wireless adapter if you are joining an existing network you will need to know the security key or passphrase being used 99
- The utility will display any available wireless networks in your area 99
- Using windows 7 99
- Configure wps 102
- Using windows vista 106
- Configure wireless security 107
- Using windows xp 109
- Configure wpa psk 110
- Troubleshooting 112
- Wireless basics 116
- Howdoeswirelesswork 117
- What is wireless 117
- Whatiswireless 117
- Why d link wireless 117
- Whouseswireless 118
- Whereiswirelessused 119
- Wireless modes 120
- Check your ip address 121
- Networking basics 121
- Statically assign an ip address 122
- Technical specifications 123
Похожие устройства
- JVC AV-14ATG2 Инструкция по эксплуатации
- D-Link DIR-825 Инструкция по эксплуатации
- Vitek VT-1201 Инструкция по эксплуатации
- Brother DCP-7055R Инструкция по эксплуатации
- D-Link DIR-835 Инструкция по эксплуатации
- Samsung SG-629… Инструкция по эксплуатации
- Ricoh SP 100SU Инструкция по эксплуатации
- Nexx NDV-7100 Инструкция по эксплуатации
- D-Link DIR-855 Инструкция по эксплуатации
- Panasonic KX-MB1500RUB Инструкция по эксплуатации
- Toshiba Satellite Pro S300L Инструкция по эксплуатации
- Texet T-415 Инструкция по эксплуатации
- D-Link DIR-857 Инструкция по эксплуатации
- Hyundai HLT-3220 Инструкция по эксплуатации
- D-Link DSL-2600U Инструкция по эксплуатации
- Tefal Virtuose 2730 Инструкция по эксплуатации
- D-Link DSL-2640U (ANNEX B) Инструкция по эксплуатации
- Samsung RT62**** Инструкция по эксплуатации
- D-Link SL-2650U Инструкция по эксплуатации
- Speed-Link SL-6241-P13 Инструкция по эксплуатации
Скачать
Случайные обсуждения
Ответы 1
Добрый день . Скажите , существует ли на данный роутер языковой пакет с русским переводом
8 лет назад
Ответы 1
Как настроить маршрутизатор DIR-815 при отсутствии компакт-диска или проверить имя беспроводной сети (SSID) и ключ беспроводного шифрования?
2 года назад
Ответы 1
Какие права оставляет себе D-Link в отношении данного руководства пользователя?
1 год назад