Fluke 1760 [89/110] Current clamp 5 a 50 a ac

Options and Accessories

Accessories 6

6-11

Current Clamp 5 A/50 A AC

This current probe has been designed for non intrusive, accurate measurements of small

AC currents. Using the latest technologies (internal memory for calibration data) provides

current ranges from 0.05 A up to 50 A. The measurement range can be selected in the PQ

Analyze software: IAC5 or IAC50.

Electrical Characteristics

Nominal current In: 5 A/50 A AC rms

Measuring ranges: 0.05 A – 5 A or 0.5 A – 50 A

Crest factor: < 3

Peak current: 18 A, 180 A

Max. non destructive current: Up to 200 A rms

Conductor position influence: < 0.5 % of range at 50/60 Hz

Error due to adjacent conductor: ≤ 15 mA/A at 50 Hz

Phase error (to reference conditions): < ±0.5 degrees

Frequency range (clamp without the

instrument):

40 Hz – 10 kHz (−3 dB)

Temperature coefficient: 0.015 % of range/ °C

Safety: 300 V AC CAT IV, type A sensor, pollution

degree 2

General Characteristics

Maximum conductor size: Diameter: 15 mm.

Bus bar: 15 x 17 mm

Cable length: 2 m

Operating temperature range: −10 °C - +55 °C

Storage temperature range: −20 - +70 °C

Operating humidity: 15 % - 85 % (non-condensing)

Weight (per clamp): Approx. 220 g

Order-number: 2540461

Reference Conditions

Environment temperature range: +18 °C to +26 °C

Humidity: 20 to 75 % rh

Current: Sinusoidal waveform, with 48 to 65 Hz

Distortion factor: < 1 %, no DC component, stray field < 40 A/m,

conductor centered within the clamp jaws