Dynacord D 12 [26/40] Mb 500 umh

MB 500 UMH

Wall mounting bracket for D15-3

Together with the TMA inclination angles between 5°

and 45° can be adjusted in 5° steps. An adjustment to

the listeners direction with turn-in to the wall is realized

additionally with the RMA.

Assembly instruction:

The relevant assembly instructions at ceilings, walls or

trusses are to be considered absolutely.

1. Install MB 500 UMH at the wall or ceiling with

suitable mounting material.

2. Remove the feet of the D15-3 enclosure and insert

the screws after removing the feet again.

3. Remove the plastic covers of the necessary M10

threaded inserts at the enclosure.

4. Insert enclosed rubber washer between bracket

and enclosure. Bolt mounting bracket together with

screw M10 and disk at the enclosure. Secure

screws with thread locking compound.

Tighten screws.

MB 500 UMH

D113099

Use adequately dimensioned rigging

equipment (DIN 18800) when connecting

to crossbeams, ceiling, walls, etc.

Leave all mounting and rigging to

experienced personnel. Carefully abide

default maximum clamping torque values

for all screw joints (DIN 898).

Drillings for suitable mounting mateials

CAUTION:

Use upper and lower

drillings only.

(refer to the illustration)