LINE 6 POD HD Pro [48/135] Fx loop

FX Edit Mode

5•4

FX Loop

The FX Loop can be inserted into any one FX Block.

The FX Loop Edit Mode screen

Adjust the Parameter & Value settings the same as with any FX Model. These FX Loop

Edit Mode settings are saved per Preset.

• Send: Reduces the level fed out the FX Loop SEND output(s) to your external

devices.

Note: Use the LINE-STOMP switch on the back of POD® HD Pro to choose between

levels for Rack FX versus Pedals. This Send parameter can then be used to further ﬁne-

tune the level fed to your connected devices.

• Return: Adjusts the level of the signal received into the FX Loop RETURN input(s).

• Mix: Blends the FX Loop signal that with the POD HD Pro tone signal. When set

to 100%, the full POD HD Pro signal is fed to the FX Loop SEND outputs. When

set to 0%, your input signal bypasses the FX Loop completely, so that you’ll hear

only your POD HD-processed signal. Be sure to set the Mix to less than 100%, or

toggle the FX Loop Block “Off,” if you do not have a complete connection between

the device’s SEND & RETURN jacks, or you’ll hear only silence from the output of

POD HD Pro!