D-Link DPH-150SE [6/53] Initial connecting and setting

DC Power port Output: 5V/1.0A

LAN Network port Connect it to PC

WAN Network port Connect it to Network

The phone has two Network ports: The WAN port and the LAN port. Before you connect the power

source, please carefully read Safety Notices of this user manual.

2.Initial connecting and Setting

2.1. connect the phone

Step 1: Connect the IP Phone to the corporate IP telephony network. Before you connect the

phone to the network, please check if your network can work normally.

You can do this in one of two ways, depending on how your workspace is set up.

Direct network connection—by this method, you need at least one available Ethernet port in your

workspace. Use the Ethernet cable in the package to connect WAN port on the back of your phone

to the Ethernet port in your workspace. Since this VoIP Phone has router functionality, whether you

have a broadband router or not, you can make direct network connect. The following two figures

are for your reference.

Shared network connection—Use this method if you have a single Ethernet port in your workspace

with your desktop computer already connected to it. First, disconnect the Ethernet cable from the

computer and attach it to the WAN port on the back of your phone. Next, use the Ethernet cable in

the package to connect LAN port on the back of your phone to your desktop computer. Your IP

Phone now shares a network connection with your computer. The following figure is for your

reference.

Step 2: Connect the handset to the handset port by the handset cable in the package.

Step 3: connect the power supply plug to the DC port on the back of the phone. Use the power

cable to connect the power supply to a standard power outlet in your workspace.