Qtech QSW-8200-28T-POEAC- DC Команды для настройки портов онлайн [13/85] 481628
![Qtech QSW-8200-28T-POEAC- DC Команды для настройки портов онлайн [13/85] 481628](/views2/1596641/page13/bgd.png)
User Manual
Chapter 1. Commands for Network Port Configuration 13
www.qtech.ru
Using [detail] to show the detail information for ethernet port and port-channel port,
the information is related with the type of switch, board card.
For ethernet port, using status to show important information of all the layer 2 ports by
list format. each port is a row, the showing information include port number, Link,
Protocl status, Speed, Duplex, Vlan, port type and port name; counter packets show
package number statistics of all ethernet ports, include layer 2 unicast, broadcast,
multicast, error of input and output redirection package number; counter rate show the
rate statistics of all ethernet ports, input and output package number, byte number in 5
minutes and 5 seconds.
Example: Show the information of VLAN 1
Switch#show interface vlan 1
Vlan1 is up, line protocol is up, dev index is 2005
Device flag 0x1003(UP BROADCAST MULTICAST)
IPv4 address is:
192.168.10.1 255.255.255.0 (Primary)
Hardware is EtherSVI, address is 00-00-00-00-00-01
MTU is 1500 bytes , BW is 0 Kbit
Encapsulation ARPA, loopback not set
5 minute input rate 0 bytes/sec, 0 packets/sec
5 minute output rate 0 bytes/sec, 0 packets/sec
The last 5 second input rate 0 bytes/sec, 0 packets/sec
The last 5 second output rate 0 bytes/sec, 0 packets/sec
Input packets statistics:
Input queue 0/600, 0 drops
0 packets input, 0 bytes, 0 no buffer
0 input errors, 0 CRC, 0 frame alignment, 0 overrun
0 ignored, 0 abort, 0 length error
Output packets statistics:
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 late collisions
Show the information of loopback 1:
Switch#show interface loopback 1
Loopback1 is up, line protocol is up, dev index is 2006
Device flag 0x100b(UP BROADCAST LOOP MULTICAST)
IPv4 address is:
1.1.1.1 255.255.255.255 (Primary)
MTU is 1500 bytes , BW is 0 Kbit
5 minute input rate 0 bytes/sec, 0 packets/sec
5 minute output rate 0 bytes/sec, 0 packets/sec
The last 5 second input rate 0 bytes/sec, 0 packets/sec
The last 5 second output rate 0 bytes/sec, 0 packets/sec
Input packets statistics:
Содержание
- Chapter 1 commands for network port configuration 7 2
- Chapter 2 commands for port isolation function 20 2
- Chapter 3 commands for port loopback detection function 23 2
- Commands for ethernet port configuration 7 2
- Content 2
- Debug loopback detection 23 2
- Isolate port apply 21 2
- Isolate port group 20 2
- Isolate port group switchport interface 20 2
- Loopback detection control 23 2
- Loopback detection control recovery timeout 24 2
- Loopback detection interval time 24 2
- Loopback detection specified vlan 25 2
- Show isolate port group 21 2
- Show loopback detection 25 2
- Chapter 1 commands for network port 7
- Commands for ethernet port configuration 7
- Configuration 7
- Chapter 2 commands for port isolation function 20
- Isolate port group 20
- Isolate port group switchport interface 20
- Isolate port apply 21
- Show isolate port group 21
- Chapter 3 commands for port loopback detection 23
- Debug loopback detection 23
- Function 23
- Loopback detection control 23
- Loopback detection control recovery timeout 24
- Loopback detection interval time 24
- Loopback detection specified vlan 25
- Show loopback detection 25
- Chapter 4 commands for uldp 26
- Debug uldp 26
- Debug uldp error 26
- Debug uldp event 26
- Debug uldp fsm interface ethernet 27
- Debug uldp interface ethernet 27
- Debug uldp packet 27
- Uldp aggressive mode 28
- Uldp enable 28
- Uldp disable 29
- Uldp hello interval 29
- Uldp manual shutdown 29
- Show uldp 30
- Uldp recovery time 30
- Uldp reset 30
- Chapter 5 commands for lldp function 32
- Clear lldp remote table 32
- Debug lldp 32
- Debug lldp packets 32
- Lldp enable 33
- Lldp enable port 33
- Lldp mode 33
- Lldp msgtxhold 34
- Lldp neighbors max num 34
- Lldp notification interval 34
- Lldp toomanyneighbors 35
- Lldp transmit delay 35
- Lldp transmit optional tlv 35
- Lldp trap 36
- Lldp tx interval 36
- Show debugging lldp 37
- Show lldp 37
- Show lldp interface ethernet 38
- Show lldp neighbors interface ethernet 38
- Show lldp traffic 39
- Chapter 6 commands for port channel 40
- Debug port channel 40
- Interface port channel 40
- Lacp port priority 41
- Lacp system priority 41
- Lacp timeout 41
- Load balance 42
- Port group 42
- Port group mode 42
- Show port group 43
- Chapter 7 commands for mtu 45
- Chapter 8 commands for efm oam 46
- Clear ethernet oam 46
- Debug ethernet oam error 46
- Debug ethernet oam fsm 46
- Debug ethernet oam packet 47
- Debug ethernet oam timer 47
- Ethernet oam 47
- Ethernet oam errored frame threshold high 48
- Ethernet oam errored frame threshold low 48
- Ethernet oam errored frame period threshold high 49
- Ethernet oam errored frame period threshold low 49
- Ethernet oam errored frame window 49
- Ethernet oam errored frame period window 50
- Ethernet oam errored frame seconds threshold high 50
- Ethernet oam errored frame seconds threshold low 51
- Ethernet oam errored frame seconds window 51
- Ethernet oam errored symbol period threshold high 52
- Ethernet oam errored symbol period threshold low 52
- Ethernet oam errored symbol period window 53
- Ethernet oam link monitor 53
- Ethernet oam mode 54
- Ethernet oam period 54
- Ethernet oam remote failure 54
- Ethernet oam remote loopback 55
- Ethernet oam remote loopback supported 55
- Ethernet oam timeout 56
- Show ethernet oam 56
- Show ethernet oam events 61
- Show ethernet oam link events configuration 64
- Show ethernet oam loopback status 65
- Bpdu tunnel dmac 67
- Bpdu tunnel gvrp 67
- Bpdu tunnel stp 67
- Chapter 9 commands for bpdu tunnel 67
- Bpdu tunnel dot1x 68
- Bpdu tunnel lacp 68
- Bpdu tunnel uldp 68
- Chapter 10 commands for lldp med 70
- Civic location 70
- Description language province state city county street locationnum location floor room postal otherinfo 70
- Ecs location 71
- Lldp med fast count 71
- Lldp med trap 72
- Lldp transmit med tlv all 72
- Lldp transmit med tlv capability 72
- Lldp transmit med tlv extendpoe 73
- Lldp transmit med tlv inventory 73
- Lldp transmit med tlv networkpolicy 74
- Network policy 74
- Show lldp 75
- Show lldp neighbors 77
- Chapter 11 commands for port security 78
- Clear port security 78
- Show port security 78
- Switchport port security 78
- Switchport port security aging 79
- Switchport port security mac address 79
- Switchport port security mac address sticky 80
- Switchport port security maximum 80
- Switchport port security violation 81
- Chapter 12 commands for ddm 82
- Clear transceiver threshold violation 82
- Debug transceiver 82
- Show transceiver 82
- Show transceiver threshold violation 83
- Transceiver monitoring 83
- Transceiver monitoring interval 84
- Transceiver threshold 84
Похожие устройства
- Qtech QSW-8200-28T-POEAC- DC Команды для потокового монитора
- Qtech QSW-8200-28T-POEAC- DC Команды для протокола маршрутизаций
- Qtech QSW-8200-28T-POEAC- DC Команды для протокола многоадресной рассылки
- Qtech QSW-8200-28T-POEAC- DC Команды для функции безопасности
- Qtech QSW-8200-28T-POEAC- DC Команды интерфейса уровня 3
- Qtech QSW-8200-28T-POEAC- DC Команды надёжности
- Qtech QSW-8200-28T-POEAC- DC Команды настройки vlan
- Qtech QSW-8200-28T-POEAC- DC Команды отладки и диагностики
- Qtech QSW-8200-28T-POEAC- DC Команды управления сетевым временем
- Qtech QSW-8200-28T-POEAC- DC Руководство пользователя
- Qtech QSW-8200-28F-AC-DC Команды для dhcp-сервера
- Qtech QSW-8200-28F-AC-DC Команды для mstp
- Qtech QSW-8200-28F-AC-DC Команды для poe
- Qtech QSW-8200-28F-AC-DC Команды для qos
- Qtech QSW-8200-28F-AC-DC Команды для базовой конфигурации
- Qtech QSW-8200-28F-AC-DC Команды для настройки портов
- Qtech QSW-8200-28F-AC-DC Команды для потокового монитора
- Qtech QSW-8200-28F-AC-DC Команды для протокола маршрутизаций
- Qtech QSW-8200-28F-AC-DC Команды для протокола многоадресной рассылки
- Qtech QSW-8200-28F-AC-DC Команды для функции безопасности