Qtech QSW-8200-28T-POEAC- DC [72/85] Lldp med trap

User Manual

Chapter 10. Commands for LLDP-MED 72

www.qtech.ru

 Usage Guide: With this command, set the number for sending the packets fast.

 Example:

 Switch(config)#lldp med fast count 5

10.5 lldp med trap

 Command: lldp med trap {enable | disable}

 Function: Configure the specified port to enable or disable the function for sending

TRAP message when LLDP-MED network topology is changed.

 Parameters: enable: Enable LLDP-MED TRAP for the port

 disable: Disable LLDP-MED TRAP for the port

 Default: Disable LLDP-MED TRAP.

 Command Mode: Port mode

 Usage Guide: Enable or disable LLDP-MED TRAP of the port.

 Example: Enable LLDP-MED TRAP of the port 19.

 Switch(Config-If-Ethernet1/0/19)# lldp med trap enable

10.6 lldp transmit med tlv all

 Command: lldp transmit med tlv all

 no lldp transmit med tlv all

 Function: Configure the specified port to send all LLDP-MED TLVs, the no command

disables the function.

 Parameter: None.

 Default: Port does not enable the function for Sending LLDP-MED TLV.

 Command Mode: Port mode

 Usage Guide: After configuring this command, if the port is able to send LLDP-MED TLV,

the sent LLDP packets with LLDP-MED TLV supported by all switches. However, LLDP

packets sent by the port without any LLDP-MED TLV after the switch configured the

corresponding no command.

 Example: Port 19 enables the function for sending LLDP-MED TLV.

 Switch(Config-If-Ethernet1/0/19)# lldp transmit med tlv all

10.7 lldp transmit med tlv capability

 Command: lldp transmit med tlv capability

 no lldp transmit med tlv capability

 Function: Configure the specified port to send LLDP-MED Capability TLV. The no

command disables the capability.

 Parameter: None.

 Default: The function is disabled for sending LLDP-MED Capability TLV.

 Command Mode: Port mode