Qtech QSW-8200-28T-POEAC- DC [48/85] Ethernet oam errored frame threshold high

User Manual

Chapter 8. Commands for EFM OAM 48

www.qtech.ru

 Example: Enable ethernet-oam of Ethernet 1/0/4.

 Switch(config)#interface ethernet 1/0/4

 Switch(Config-If-Ethernet1/0/4)#ethernet-oam

8.7 ethernet-oam errored-frame threshold high

 Command: ethernet-oam errored-frame threshold high {<high-frames> | none}

 no ethernet-oam errored-frame threshold high

 Function: Configure the high threshold of errored frame event, no command restores

the default value.

 Parameters: <high-frames>, the high detection threshold of errored frame event,

ranging from 2 to 4294967295.

 none, cancel the high threshold configuration.

 Command Mode: Port mode

 Default: none.

 Usage Guide: During the specific detection period, serious link event is induced if the

number of errored frame is larger than or equal to the high threshold and the device

notifies the peer by sending Information OAMPDU of which the value of Link Fault flag

in Flags field is 1. Note that the high threshold can not be less than the low threshold.

 Example: Configure the high threshold of errored frame event on Ethernet 1/0/4 to be

3000.

 Switch(Config-If-Ethernet1/0/4)#ethernet-oam errored-frame threshold high 3000

8.8 ethernet-oam errored-frame threshold low

 Command: ethernet-oam errored-frame threshold low <low-frames>

 no ethernet-oam errored-frame threshold low

 Function: Configure the low threshold of errored frame event, no command restores

the default value.

 Parameters: <low-frames>, the low detection threshold of errored frame event,

ranging from 1 to 4294967295.

 Command Mode: Port mode

 Default: 1.

 Usage Guide: During the specific detection period, errored frame event is induced if the

number of errored frame is larger than or equal to the low threshold and the device

notifies the peer by sending event notification OAMPDU. Note that the low threshold

can not be larger than the high threshold.

 Example: Configure the low threshold of errored frame event on Ethernet 1/0/4 to 100.

 Switch(Config-If-Ethernet1/0/4)#ethernet-oam errored-frame threshold low 100