Qtech QSW-8200-28T-POEAC- DC [49/85] Ethernet oam errored frame period threshold high

User Manual

Chapter 8. Commands for EFM OAM 49

www.qtech.ru

8.9 ethernet-oam errored-frame window

 Command: ethernet-oam errored-frame window <seconds>

 no ethernet-oam errored-frame window

 Function: Configure the detection period of errored frame event, no command restores

the default value.

 Parameters: <seconds> is the time for counting the specified frame number, its range

from 5 to 300, unit is 200ms.

 Command Mode: Port mode

 Default: 5.

 Usage Guide: Detect the errored frame number of the port after the time of specific

detection period. If the number of errored frame is larger than or equal to the

threshold, bring the corresponding event and notify the peer through OAMPDU.

 Example: Configure the detection period of errored frame event on port1/0/4 to be

20s.

 Switch(Config-If-Ethernet1/0/4)#ethernet-oam errored-frame window 100

8.10 ethernet-oam errored-frame-period threshold high

 Command: ethernet-oam errored-frame-period threshold high {<high-frames> |

none}

 no ethernet-oam errored-frame-period threshold high

 Function: Configure the high threshold of errored frame period event, no command

restores the default value.

 Parameters: <high-frames>, the high detection threshold of errored frame period

event, ranging from 2 to 4294967295.

 none, cancel the high threshold configuration.

 Command Mode: Port mode

 Default: none.

 Usage Guide: During the specific detection period, serious link event is induced if the

number of errored frame is larger than or equal to the high threshold and the device

notifies the peer by sending Information OAMPDU of which the value of Link Fault flag

in Flags field is 1. Note that the high threshold can not be less than the low threshold.

 Example: Configure the high threshold of errored frame period event on port 1/0/4 to

be 3000.

 Switch(Config-If-Ethernet1/0/4)#ethernet-oam errored-frame-period threshold high

3000

8.11 ethernet-oam errored-frame-period threshold low

 Command: ethernet-oam errored-frame-period threshold low <low-frames>

 no ethernet-oam errored-frame-period threshold low