Qtech QSW-8200-28T-POEAC- DC [28/85] Uldp aggressive mode

User Manual

Chapter 4. Commands for ULDP 28

www.qtech.ru

 Function: Enable receives and sends packet debug function, after that. Display the type

and interface of the packet which receiving and sending on the client. The no form

command disables this function.

 Parameter: None.

 Command Mode: Admin Mode.

 Default: Disabled.

 Usage Guide: Use this command to display the packet that receiving on each interface.

 Switch#debug uldp packet receive

4.7 uldp aggressive-mode

 Command: uldp aggressive-mode

 no uldp aggressive-mode

 Function: To configure ULDP to work in aggressive mode. The no form of this command

will restore the normal mode.

 Parameters: None.

 Command Mode: Global Configuration Mode and Port Configuration Mode.

 Default: Normal mode.

 Usage Guide: The ULDP working mode can be configured only if it is enabled globally.

When ULDP aggressive mode is enabled globally, all the existing fiber ports will work in

aggressive mode. For the copper ports and fiber ports which are available after the

configuration is available, aggressive mode should be enabled in port configuration

mode.

 Example: To enable ULDP aggressive mode globally.

 Switch(config)#uldp aggressive-mode

4.8 uldp enable

 Command: uldp enable

 Function: ULDP will be enabled after issuing this command. In global configuration

mode, this command will enable ULDP for the global. In port configuration mode, this

command will enable ULDP for the port.

 Parameters: None.

 Command Mode: Global Configuration Mode and Port Configuration Mode.

 Default: By default ULDP is not configured.

 Usage Guide: ULDP can be configured for the ports only if ULDP is enabled globally. If

ULDP is enabled globally, it will be effect for all the existing fiber ports. For copper ports

and fiber ports which are available after ULDP is enabled, this command should be

issued in the port configuration mode to make ULDP be effect.

 Example: Enable ULDP in global configuration mode.

 Switch(config)#uldp enable