Qtech QSW-8200-28T-POEAC- DC [79/85] Switchport port security aging

User Manual

Chapter 11. Commands for PORT SECURITY 79

www.qtech.ru

 Default: Disable.

 Command Mode: Port mode

 Usage Guide: Clear all dynamic MACs after the interface enabled port-security, and all

MACs learnt from the interfaces are tagged with

FDB_TYPE_PORT_SECURITY_DYNAMIC. After disabling port-security of the interfaces,

clear all secure MACs or change them into the dynamic MACs.

 Example: Enable port-security on the interface.

 Switch(config-if- ethernet1/0/1)#switchport port-security

11.4 switchport port-security aging

 Command: switchport port-security aging {static | time <value> | type {absolute |

inactivity}}

 no switchport port-security violation aging {static | time | type}

 Function: Enable the aging entries of port-security, and specify the aging time and type

on the interface.

 Parameter: static：Enable the aging of the static MAC address configured on the

specified interface.

 time <value>：Specify MAC aging time of the interface, its range from 1

to 1440mins. The default value is 0, that means disable the aging.

 type：Specify the aging type

 absolute：The expiration of the aging timer on the interface, all secure

MACs of the interfaces will get aged and be removed from the MAC

table.

 inactivity：The expiration of the aging timer on the interface, the

entries will get aged without the traffic, the entries are still kept in the

aging period with the traffic.

 Default: Do not enable port-security aging, the default aging time is 0.

 Aging mode is absolute by default.

 The static entries are not aged by default.

 Command Mode: Port mode

 Usage Guide: None.

 Example: Configure the aging time of the secure MAC as 1 second on the interface.

 Switch (config-if- ethernet1/0/1)# switchport port-security aging time 1

11.5 switchport port-security mac-address

 Command: switchport port-security mac-address <mac-address> [vlan <vlan-id>]

 no switchport port-security mac-address <mac-address> [vlan <vlan-

id>]

 Function: Configure the static secure MAC on the interface, the no command cancels

the configuration.