Qtech QSW-8200-28T-POEAC- DC [84/85] Transceiver monitoring interval

User Manual

Chapter 12. Commands for DDM 84

www.qtech.ru

 Parameter: enable/ disable: Enable or disable the function.

 Command Mode: Port mode

 Default: Disable.

 Usage Guide: None.

 Example: Enable the transceiver monitoring of ethernet1/0/1.

 Switch(config-if-ethernet1/0/1)#transceiver-monitoring enable

12.6 transceiver-monitoring interval

 Command: transceiver-monitoring interval <minutes>

 no transceiver-monitoring interval

 Function: Set the interval of the transceiver monitoring. The no command sets the

interval to be the default interval of 15 minutes.

 Parameter: <minutes>: The interval of the transceiver monitoring needs to be set.

 Command Mode: Global mode

 Default: 15 minutes.

 Usage Guide: None.

 Example: Set the interval of the transceiver monitoring as 1 minute.

 Switch(config)#transceiver-monitoring interval 1

12.7 transceiver threshold

 Command: transceiver threshold {default | {temperature | voltage | bias | rx-power

| tx-power} {high-alarm | low-alarm | high-warn | low-warn} {<value> | default}}

 Function: Set the threshold defined by the user.

 Parameters: default: Restore the threshold as the default threshold set by the

manufacturer. If the monitoring index is not specified, restore all thresholds, if the

monitoring index is specified, restore the corresponding threshold only.

o temperature：The monitoring index—temperature

 voltage：The monitoring index—voltage

 bias：The monitoring index—bias current

 rx-power：The monitoring index—receiving power

 tx-power：The monitoring index—sending power

 high-alarm：High-alarm of the monitoring index, namely there is alarm

with A+ if exceeding the threshold.

 low-alarm：Low-alarm of the monitoring index, namely there is alarm

with A- if exceeding the threshold.

 high-warn：High-warn of the monitoring index, namely there is warning

with W+ if exceeding the threshold.

 low-warn：Low-warn of the monitoring index, namely there is warning

with W- if exceeding the threshold.

 Command Mode: Port mode