Qtech QSW-8200-28T-POEAC- DC [21/85] Isolate port apply

User Manual

Chapter 2. Commands for Port Isolation Function 21

www.qtech.ru

channel means that the ports to be isolated is aggregation ports; <IFNAME> is the

name of the interface, such as e1/0/1. If users use interface name, the parameter of

ethernet will not be required.

 Command Mode: Global Mode.

 Default: None.

 Usage Guide: Users can add Ethernet ports into or remove them from a port isolation

group according to their requirements. When an Ethernet port is a member of more

than one port isolate group, it will be isolated from every port of all groups it belongs

to.

 Example: Add Ethernet ports 1/0/1-2 and 1/0/5 into a port isolation group named as

”test”.

 Switch(config)#isolate-port group test switchport interface ethernet 1/0/1-2; 1/0/5

2.3 isolate-port apply

 Command: isolate-port apply [<l2|l3|all>]

 Function: This command will apply the port isolation configuration to isolate layer-2

flows, layer-3 flows or all flows.

 Parameters: <l2|l3|all> the flow to be isolated, l2 means isolating layer-2 flows, l3

means isolating layer-3 flows, all means isolating all flows.

 Command Mode: Global Mode.

 Default: Isolate all flows.

 Usage Guide: User can apply the port isolation configuration to isolate layer-2 flows,

layer-3 flows or all flows according to their requirements.

 Example: Only apply port isolation to layer-2 flows on the switch.

 Switch(config)#isolate-port apply l2

2.4 show isolate-port group

 Command: show isolate-port group [<WORD>]

 Function: Display the configuration of port isolation, including all configured port

isolation groups and Ethernet ports in each group.

 Parameters: <WORD> the name identification of the group, no longer than 32

characters; no parameter means to display the configuration of all port isolation

groups.

 Command Mode: Admin Mode and Global Mode.

 Default: Display the configuration of all port isolation groups.

 Usage Guide: Users can view the configuration of port isolation with this command.

 Example: Display the port isolation configuration of the port isolation group named as

“test”.

 Switch(config)#show isolate-port group test

 Isolate-port group test