Qtech QSW-8200-28T-POEAC- DC [74/85] Lldp transmit med tlv networkpolicy

User Manual

Chapter 10. Commands for LLDP-MED 74

www.qtech.ru

 Usage Guide: After configuring this command, if the port is able to send LLDP-MED TLV,

LLDP packets with LLDP-MED Inventory Management TLVs sent by the port. However,

LLDP packets without LLDP-MED Inventory Management TLVs sent by the port after the

switch configured the corresponding no command. Note: LLDP-MED Capability TLV sent

by the port must be configured before sending LLDP-MED Inventory Management TLVs,

or else the configuration cannot be successful.

 Example: Port 19 enables the function for sending LLDP-MED Inventory Management

TLVs.

 Switch(Config-If-Ethernet1/0/19)# lldp transmit med tlv inventory

10.10 lldp transmit med tlv networkPolicy

 Command: lldp transmit med tlv networkPolicy

 no lldp transmit med tlv networkPolicy

 Function: Configure the specified port to send LLDP-MED Network Policy TLV. The no

command disables the capability.

 Parameter: None.

 Default: The function is disabled for sending LLDP-MED Network Policy TLV.

 Command Mode: Port mode

 Usage Guide: After configuring this command, if the port is able to send LLDP-MED TLV,

LLDP packets with LLDP-MED Network Policy TLV sent by the port. However, LLDP

packets without LLDP-MED Network Policy TLV sent by the port after the switch

configured the corresponding no command. Note: LLDP-MED Capability TLV sent by the

port must be configured before sending LLDP-MED Network Policy TLV, or else the

configuration cannot be successful.

 Example: Port 19 enables the function for sending LLDP-MED Network Policy TLV.

 Switch(Config-If-Ethernet1/0/19)# lldp transmit med tlv networkPolicy

10.11 network policy

 Command: network policy {voice | voice-signaling | guest-voice | guest-voice-

signaling | softphone-voice | video-conferencing | streaming-video | video-signaling}

[status {enable | disable}] [tag {tagged | untagged}] [vid {<vlan-id> | dot1p}] [cos

<cos-value>] [dscp <dscp-value> ]

 no network policy {voice | voice-signaling | guest-voice | guest-voice-

signaling | softphone-voice | video-conferencing | streaming- video |

video-signaling}

 Function: Configure the network policy of the port, including VLAN ID, the supported

application (such as voice and video), the application priority and the used policy, and

so on.