Qtech QSW-8200-28T-POEAC- DC [80/85] Switchport port security mac address sticky

User Manual

Chapter 11. Commands for PORT SECURITY 80

www.qtech.ru

 Parameter: mac-address：Configure the specified MAC address as the static secure

MAC.

 vlan-id：The specified VLAN of the MAC address, it only takes effect on

trunk and hybrid interfaces.

 Default: No secure MAC is bound by the interface.

 Command Mode: Port mode

 Usage Guide: When configuring the static secure MAC, pay attention to the number of

the current secure MAC whether exceed the maximum MAC limit allowed by the

interface. If exceeding the maximum MAC limit, it will result in violation operation.

 Example: Configure the secure MAC address on the interface.

 Switch (config-if- ethernet1/0/1)# switchport port-security mac-address 00-00-00-00-

00-01

11.6 switchport port-security mac-address sticky

 Command: switchport port-security mac-address sticky [mac-address] [vlan <vlan-id>]

 no switchport port-security mac-address sticky [mac-address] [vlan

<vlan-id>]

 Function: Configure the static secure MAC with the sticky type on the interface, the no

command cancels the configured secure MAC.

 Parameter: mac-address：Configure the specified MAC address as the static secure

MAC with the sticky type.

 vlan-id：The specified VLAN of the MAC address, it only takes effect on

trunk and hybrid interfaces.

 Default: No secure MAC is bound by the interface with the sticky type.

 Command Mode: Port mode

 Usage Guide: When configuring the static secure MAC with sticky type, pay attention to

the number of the current secure MAC whether exceed the maximum MAC limit

allowed by the interface. If exceeding the maximum MAC limit, it will result in violation

operation.

 Example: Configure the secure MAC address on the interface.

 Switch(config-if-ethernet1/0/1)#switchport port-security mac-address sticky 00-00-00-

00-00-01

11.7 switchport port-security maximum

 Command: switchport port-security maximum <value> [vlan <vlan-list>]

 no switchport port-security maximum <value> [vlan <vlan-list>]

 Function: Configure the maximum number of the secure MAC allowed by the interface,

if specifying VLAN parameter, it means the maximum number in the configured VLANs.

The no command cancels the maximum number of the secure MAC configured by the

interface.