Qtech QSW-8200-28T-POEAC- DC [41/85] Lacp port priority

User Manual

Chapter 6. Commands for Port Channel 41

www.qtech.ru

6.3 lacp port-priority

 Command: lacp port-priority <port-priority>

 no lacp port-priority

 Function: Set the port priority of LACP protocol.

 Parameters: <port-priority>: the port priority of LACP protocol, the range from 0 to

65535.

 Command mode: Port Mode.

 Default: The default priority is 32768 by system.

 Usage Guide: Use this command to modify the port priority of LACP protocol, the no

command restores the default value.

 Example: Set the port priority of LACP protocol.

 Switch(Config-If-Ethernet1/0/1)# lacp port-priority 30000

6.4 lacp system-priority

 Command: lacp system-priority <system-priority>

 no lacp system-priority

 Function: Set the system priority of LACP protocol.

 Parameters: <system-priority>: The system priority of LACP protocol, ranging from 0 to

65535.

 Command mode: Global Mode

 Default: The default priority is 32768.

 Usage Guide: Use this command to modify the system priority of LACP protocol, the no

command restores the default value.

 Example: Set the system priority of LACP protocol.

 Switch(config)#lacp system-priority 30000

6.5 lacp timeout

 Command: lacp timeout {short | long}

 no lacp timeout

 Function: Set the timeout mode of LACP protocol.

 Parameters: The timeout mode includes long and short.

 Command mode: Port Mode

 Default: Long.

 Usage Guide: Set the timeout mode of LACP protocol.

 Example: Set the timeout mode as short in LACP protocol.

 Switch(Config-If-Ethernet1/0/1)#lacp timeout short