Qtech QSW-8200-28T-POEAC- DC [67/85] Chapter 9 commands for bpdu tunnel

User Manual

Chapter 9. Commands for bpdu-tunnel 67

www.qtech.ru

Chapter 9 COMMANDS FOR BPDU-TUNNEL

9.1 bpdu-tunnel dmac

 Command: bpdu-tunnel dmac <mac>

 no bpdu-tunnel dmac

 Function: Configure the tunnel MAC address globally, the no command restores the

default tunnel MAC address.

 Parameter: <mac>: MAC address

 Command Mode: Global mode

 Default: Default MAC address.

 Usage Guide: Configure the tunnel MAC address globally, use the configured MAC (it

must be multicast MAC address) to forward the specified protocol across the tunnel.

 Example: Configure the tunnel MAC address.

 Switch(Config)# bpdu-tunnel dmac 01-02-03-04-05-06

9.2 bpdu-tunnel stp

 Command: bpdu-tunnel stp

 no bpdu-tunnel stp

 Function: Configure the specified port to forward stp packets across the tunnel, the no

command cancels the operation.

 Parameter: None.

 Command Mode: Port mode

 Default: Port does not forward any protocol packets across the tunnel.

 Usage Guide: Disable stp function on the port before configuring this command.

 Example: Configure Ethernet 1/0/5 to forward stp packets across the tunnel.

 Switch(Config)#in Ethernet 1/0/5

 Switch(Config-if-ethernet 1/0/5)#bpdu-tunnel stp

9.3 bpdu-tunnel gvrp

 Command: bpdu-tunnel gvrp

 no bpdu-tunnel gvrp

 Function: Configure the specified port to forward gvrp packets across the tunnel, the

no command cancels the operation.

 Parameter: None.

 Command Mode: Port mode

 Default: Port does not forward any protocol packets across the tunnel.

 Usage Guide: Disable gvrp function on the port before configuring this command.

 Example: Configure Ethernet 1/0/5 to forward gvrp packets across the tunnel.