Qtech QSW-8200-28T-POEAC- DC [30/85] Uldp recovery time

User Manual

Chapter 4. Commands for ULDP 30

www.qtech.ru

4.12 uldp recovery-time

 Command: uldp recovery-time<integer>

 no uldp recovery-time

 Function: To configure the interval for ULDP recovery timer. The no form of this

command will restore the default configuration.

 Parameters: <integer>: the time out value for the ULDP recovery timer. Its value is

limited between 30 and 86400 seconds.

 Command Mode: Global Configuration Mode.

 Default: 0 is set by default which means the recovery is disabled.

 Usage Guide: If an interface is shutdown by ULDP, and the recovery timer times out,

the interface will be reset automatically. If the recovery timer is set to 0, the interface

will not be reset.

 Example: To set the recovery timer to be 600 seconds.

 Switch(config)#uldp recovery-time 600

4.13 uldp reset

 Command: uldp reset

 Function: To reset the port when ULDP is shutdown.

 Parameters: None.

 Command Mode: Globally Configuration Mode and Port Configuration Mode.

 Default: None.

 Usage Guide: This command can only be effect only if the specified interface is disabled

by ULDP.

 Example: To reset all the port which are disabled by ULDP.

 Switch(config)#uldp reset

4.14 show uldp

 Command: show uldp [interface ethernet<interface-name>]

 Function: To show the global ULDP configuration and status information of interface. If

<interface-name> is specified, ULDP configuration and status about the specified

interface as well as its neighbors’ will be displayed.

 Parameters: <interface-name> is the interface name.

 Command Mode: Admin and Configuration Mode.

 Default: None.

 Usage Guide: If no parameters are appended, the global ULDP information will be

displayed. If the interface name is specified, information about the interface and its

neighbors will be displayed along with the global information.

 Example: To display the global ULDP information.

