Qtech QSW-8200-28T-POEAC- DC [34/85] Lldp msgtxhold

User Manual

Chapter 5. Commands for LLDP Function 34

www.qtech.ru

 Usage Guide: Choose the operating state of the lldp Agent on the port.

 Example: Configure the state of port ethernet 1/0/5 of the switch as “receive”.

 Switch(config)#in ethernet 1/0/5

 Switch(Config-If-Ethernet1/0/5)#lldp mode receive

5.7 lldp msgTxHold

 Command: lldp msgTxHold <value>

 no lldp msgTxHold

 Function: Set the multiplier value of the aging time carried by update messages sent by

the all ports with LLDP function enabled, the value ranges from 2 to 10.

 Parameters: <value> is the aging time multiplier, ranging from 2 to 10.

 Default: the value of the multiplier is 4 by default.

 Command Mode: Global Mode.

 Usage Guide: After configuring the multiplier, the aging time is defined as the product

of the multiplier and the interval of sending messages, and its maximum value is 65535

seconds.

 Example: Set the value of the aging time multiplier as 6.

 Switch(config)#lldp msgTxHold 6

5.8 lldp neighbors max-num

 Command: lldp neighbors max-num <value>

 no lldp neighbors max-num

 Function: Set the maximum number of entries can be stored in Remote MIB.

 Parameters: <value> is the configured number of entries, ranging from 5 to 500.

 Default: The maximum number of entries can be stored in Remote MIB is 100.

 Command Mode: Port Configuration Mode.

 Usage Guide: The maximum number of entries can be stored in Remote MIB.

 Example: Set the Remote as 200 on port ethernet 1/0/5 of the switch.

 Switch(config)#in ethernet 1/0/5

 Switch(Config-If-Ethernet1/0/5)# lldp neighbors max-num 200

5.9 lldp notification interval

 Command: lldp notification interval <seconds>

 no lldp notification interval

 Function: When the time interval ends, the system is set to check whether the Remote

Table has been changed. If it has, the system will send Trap to the SNMP management

end.

 Parameters: <seconds>is the time interval, ranging from 5 to 3600 seconds.

 Default: The time interval is 5 seconds.