Qtech QSW-8200-28T-POEAC- DC [38/85] Show lldp interface ethernet

User Manual

Chapter 5. Commands for LLDP Function 38

www.qtech.ru

 Usage Guide: Users can check all the configuration information of global LLDP by using

“show lldp”.

 Example: Check the configuration information of global LLDP after it is enabled on the

switch.

 Switch(config)#show lldp

 -----LLDP GLOBAL INFORMATIONS-----

 LLDP enabled port : Ethernet 1/0/1

 LLDP interval :30

 LLDP txTTL :120

 LLDP txShutdownWhile :2

 LLDP NotificationInterval :5

 LLDP txDelay :20

 -------------END------------------

5.17 show lldp interface ethernet

 Command: show lldp interface ethernet <IFNAME>

 Function: Display the configuration information of LLDP on the port, such as: the

working state of LLDP Agent.

 Parameters: <IFNAME>: Interface name.

 Default: Do not display the configuration information of LLDP on the port.

 Command Mode: Admin Mode, Global Mode.

 Usage Guide: Users can check the configuration information of LLDP on the port by

using “show lldp interface ethernet XXX”.

 Example: Check the configuration information of LLDP on the port after LLDP is enabled

on the switch.

 Switch(config)#show lldp interface ethernet 1/0/1

 Port name : ethernet 1/0/1

 LLDP Agent Adminstatus: Both

 LLDP Operation TLV: portDecs sysName sysDesc sysCap

 LLDP Trap Status: disable

 LLDP maxRemote: 100

 LLDP Overflow handle: discard

 LLDP interface remote status : Full

5.18 show lldp neighbors interface ethernet

 Command: show lldp neighbors interface ethernet < IFNAME >

 Function: Display the LLDP neighbor information of the port.

 Parameters: None.

 Default: Do not display the LLDP neighbor information of the port.

 Command Mode: Admin Mode, Global Mode.