Qtech QSW-8200-28T-POEAC- DC [33/85] Lldp enable

User Manual

Chapter 5. Commands for LLDP Function 33

www.qtech.ru

5.4 lldp enable

 Command: lldp enable

 lldp disable

 Function: Globally enable LLDP function; disable command globally disables LLDP

function.

 Parameters: None.

 Default: Disable LLDP function.

 Command Mode: Global Mode.

 Usage Guide: If LLDP function is globally enabled, it will be enabled on every port.

 Example: Enable LLDP function on the switch.

 Switch(config)#lldp enable

5.5 lldp enable (Port)

 Command: lldp enable

 lldp disable

 Function: Enable the LLDP function module of ports in port configuration mode; disable

command will disable the LLDP function module of port.

 Parameters: None.

 Default: the LLDP function module of ports is enabled by default in port configuration

mode.

 Command Mode: Port Configuration Mode.

 Usage Guide: When LLDP is globally enabled, it will be enabled on every port, the

switch on a port is used to disable this function when it is unnecessary on the port.

 Example: Disable LLDP function of port on the port ethernet 1/0/5 of the switch.

 Switch(config)#in ethernet 1/0/5

 Switch(Config-If-Ethernet1/0/5)#lldp disable

5.6 lldp mode

 Command: lldp mode <send | receive | both | disable>

 Function: Configure the operating state of LLDP function of the port.

 Parameters: send: Configure the LLDP function as only being able to send messages.

 receive: Configure the LLDP function as only being able to receive

messages.

 both: Configure the LLDP function as being able to both send and receive

messages.

 disable: Configure the LLDP function as not being able to send or receive

messages.

 Default: The operating state of the port is “both”.

 Command Mode: Port Configuration Mode.