Qtech QSW-8200-28T-POEAC- DC [51/85] Ethernet oam errored frame seconds threshold low

User Manual

Chapter 8. Commands for EFM OAM 51

www.qtech.ru

 Function: Configure the high threshold of errored frame seconds event, no command

restores the default value.

 Parameters: <high-seconds>, the high detection threshold of errored frame seconds

event, ranging from 2 to 65535 seconds.

 none, cancel the high threshold configuration.

 Command Mode: Port mode

 Default: none.

 Usage Guide: During the specific detection period, serious link event is induced if the

number of errored frame seconds is larger than or equal to the high threshold and the

device notifies the peer by sending Information OAMPDU of which the value of Link

Fault flag in Flags field is 1. Note that the high threshold should not be less than the low

threshold. The definition of errored frame seconds is the second in which errored frame

is received.

 Example: Configure the high threshold of errored frame seconds event on port 1/0/4 to

be 3000.

 Switch(Config-If-Ethernet1/0/4)#ethernet-oam errored-frame-seconds threshold high

3000

8.14 ethernet-oam errored-frame-seconds threshold low

 Command: ethernet-oam errored-frame-seconds threshold low <low-seconds>

 no ethernet-oam errored-frame-seconds threshold low

 Function: Configure the low threshold of errored frame seconds event, no command

restores the default value.

 Parameters: <low-seconds>, the low detection threshold of errored frame seconds

event, ranging from 1 to 65535 seconds.

 Command Mode: Port mode

 Default: 1.

 Usage Guide: During the specific detection period, errored frame seconds event is

induced if the number of errored frame seconds is larger than or equal to the low

threshold and the device notifies the peer by sending event notification OAMPDU. Note

that the low threshold should not be larger than the high threshold. The definition of

errored frame seconds is the second in which errored frame is received.

 Example: Configure the low threshold of errored frame seconds event on port 1/0/4 to

be 100.

 Switch(Config-If-Ethernet1/0/4)#ethernet-oam errored-frame-seconds threshold low

100

8.15 ethernet-oam errored-frame-seconds window

 Command: ethernet-oam errored-frame-seconds window <seconds>

 no ethernet-oam errored-frame-seconds window