Qtech QSW-8200-28T-POEAC- DC [42/85] Load balance

User Manual

Chapter 6. Commands for Port Channel 42

www.qtech.ru

6.6 load-balance

 Command: load-balance {dst-src-mac | dst-src-ip | dst-src-mac-ip}

 Function: Set load-balance mode for switch, it takes effect for port-group and ECMP at

the same time.

 Parameter: dst-src-mac performs load-balance according to the source and destination

MAC

 dst-src-ip performs load-balance according to the destination and source IP

 dst-src-mac-ip performs load-balance according to the destination and

source MAC, the destination and source IP

 Command mode: Global mode.

 Default: Perform load-balance according to the source and destination MAC.

 Usage Guide: Use port-channel or ECMP to implement load-balance, user can configure

the load-balance mode according to the requirements. If the specific load-balance

mode of the command line is different with the current load-balance mode, then

modify the load-balance as the specific load-balance of command line; otherwise return

a message to notice that the current mode is already configured.

 Example: Set load-balance mode.

 Switch(config)#load-balance src-mac-ip

6.7 port-group

 Command: port-group <port-group-number>

 no port-group <port-group-number>

 Function: Creates a port group. The no command deletes that group.

 Parameters: <port-group-number> is the group number of a port channel from 1～128.

 Default: There is no port-group.

 Command mode: Global Mode

 Example: Creating a port group.

 Switch(config)# port-group 1

 Delete a port group.

 Switch(config)#no port-group 1

6.8 port-group mode

 Command: port-group <port-group-number> mode {active | passive | on}

 no port-group

 Function: Add a physical port to port channel, the no operation removes specified port

from the port channel.

 Parameters: <port-group-number> is the group number of port channel, from 1～128;

active enables LACP on the port and sets it in Active mode; passive enables LACP on the