Aten CS724KM [39/99] Keyboard language

Chapter 4. Hotkey Operation

Keyboard Language

To change the keyboard language, do the following:

1. Invoke HSM (see page 24).

2. Press [F6] [nn] [Enter].

Note: nn is a two-digit number that represents the keyboard language code

(US English: 33; French: 08; Japanese: 15; German: 09).

Port Switching Keys

To disable the Port Switching Keys ([Scroll Lock] [Scroll Lock] / [Ctrl] [Ctrl]),

do the

following:

1. Invoke HSM (see page 24).

2. Press [X] [Enter].

This procedure is a toggle. Repeat to revert to the original setting.

Firmware Upgrade Mode

To set the switch to Firmware Upgrade Mode, do the following:

1. Invoke HSM (see page 24).

2. Key in: [U] [P] [G] [R] [A] [D] [E].

3. Press [Enter]. The front panel LEDs flash to indicate the upgrade has

started.

To exit Firmware Upgrade Mode, you must power off the switch.

Restore Default Settings

To reset the switch to its default hotkey settings, do the following:

1. Invoke HSM (see page 24).

2. Press [R] [Enter].

All hotkey settings return to the factory default values (See Hotkey Default

Settings, page 86).

Note: When the Driver AP is turned on, this hotkey operation will be

disabled.