Husqvarna 435 II (9676758-35) [12/388] General safety precautions
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Husqvarna 435 II (9676758-35) [12/388] General safety precautions

Husqvarna 435 II (9676758-35) [12/388] General safety precautions
GENERAL SAFETY PRECAUTIONS
12 – English
1155355-93 Rev.4 2014-11-24
If you get a violent kickback while the kickback zone of
the bar is farthest away from you the chain brake is
designed to be activated by the inertia in the kickback
direction.
(7)
If the kickback is less violent or the kickback zone of
the bar is closer to you the chain brake will be
activated manually by the movement of your left hand.
• In the felling position the left hand is in a position that
makes manual activation of the chain brake
impossible. With this type of grip, that is when the left
hand is placed so that it cannot affect the movement
of the front hand guard, the chain brake can only be
activated by the inertia action. (8)
Will my hand always activate the chain
brake during a kickback?
No. It takes a certain force to move the hand guard
forward. If your hand only lightly touches the front guard
or slips over it, the force may not be enough to trigger the
chain brake. You should also maintain a firm grip of the
chain saw handles while working. If you do and
experience a kickback, your hand may never leave the
front handle and will not activate the chain brake, or the
chain brake will only activate after the saw has swung
around a considerable distance. In such instances, the
chain brake might not have enough time to stop the saw
chain before it touches you.
There are also certain positions in which your hand
cannot reach the front hand guard to activate the chain
brake; for example, when the saw chain is held in felling
position.
Will my inertia activated chain brake
always activate during kickback in the
event of a kickback?
No. First your brake must be in working order. Testing the
brake is simple, see instructions under the heading
Checking, maintaining and servicing chain saw safety
equipment. We recommend you do before you begin each
work session. Second the kickback must be strong
enough to activate the chain brake. If the chain brake is
too sensitive it would activate all the time which would be
a nuisance.
Will my chain brake always protect me
from injury in the event of a kickback?
No. First, the chain brake must be in working order to
provide the intended protection. Second, it must be
activated during the kickback as described above to stop
the saw chain. Third, the chain brake may be activated but
if the bar is too close to you the brake might not have
enough time to slow down and stop the chain before the
chain saw hits you.
Only you and proper working technique can eliminate
kickback and its danger.
Throttle lockout
The throttle lockout is designed to prevent accidental
operation of the throttle control. When you press the lock
(A) (i.e. when you grasp the handle) it releases the throttle
control (B). When you release the handle the throttle
control and the throttle lockout both move back to their
original positions. This arrangement means that the
throttle control is automatically locked at the idle setting.
(9)
Chain catcher
The chain catcher is designed to catch the chain if it snaps
or jumps off. This should not happen if the chain is
properly tensioned (see instructions under the heading
Assembly) and if the bar and chain are properly serviced
and maintained (see instructions under the heading
General working instructions). (10)
Right hand guard
Apart from protecting your hand if the chain jumps or
snaps, the right hand guard stops branches and twigs
from interfering with your grip on the rear handle. (11)
Vibration damping system
Your machine is equipped with a vibration damping
system that is designed to minimize vibration and make
operation easier.
The machine′s vibration damping system reduces the
transfer of vibration between the engine unit/cutting
equipment and the machine′s handle unit. The body of the
chain saw, including the cutting equipment, is insulated
from the handles by vibration damping units.
Cutting hardwoods (most broadleaf trees) creates more
vibration than cutting softwoods (most conifers). Cutting
with cutting equipment that is blunt or faulty (wrong type
or badly sharpened) will increase the vibration level.
Stop switch
Use the stop switch to switch off the engine. (12)
!
WARNING! Overexposure to vibration
can lead to circulatory damage or nerve
damage in people who have impaired
circulation. Contact your doctor if you
experience symptoms of overexposure
to vibration. Such symptoms include
numbness, loss of feeling, tingling,
pricking, pain, loss of strength, changes
in skin colour or condition. These
symptoms normally appear in the
fingers, hands or wrists. These
symptoms may be increased in cold
temperatures.

Содержание

Похожие устройства

GENERAL SAFETY PRECAUTIONS If you get a violent kickback while the kickback zone of the bar is farthest away from you the chain brake is designed to be activated by the inertia in the kickback direction 7 If the kickback is less violent or the kickback zone of the bar is closer to you the chain brake will be activated manually by the movement of your left hand In the felling position the left hand is in a position that makes manual activation of the chain brake impossible With this type of grip that is when the left hand is placed so that it cannot affect the movement of the front hand guard the chain brake can only be activated by the inertia action 8 Will my hand always activate the chain brake during a kickback No It takes a certain force to move the hand guard forward If your hand only lightly touches the front guard or slips over it the force may not be enough to trigger the chain brake You should also maintain a firm grip of the chain saw handles while working If you do and experience a kickback your hand may never leave the front handle and will not activate the chain brake or the chain brake will only activate after the saw has swung around a considerable distance In such instances the chain brake might not have enough time to stop the saw chain before it touches you There are also certain positions in which your hand cannot reach the front hand guard to activate the chain brake for example when the saw chain is held in felling position Will my inertia activated chain brake always activate during kickback in the event of a kickback No First your brake must be in working order Testing the brake is simple see instructions under the heading Checking maintaining and servicing chain saw safety equipment We recommend you do before you begin each work session Second the kickback must be strong enough to activate the chain brake If the chain brake is too sensitive it would activate all the time which would be a nuisance Will my chain brake always protect me from injury in the event of a kickback No First the chain brake must be in working order to provide the intended protection Second it must be activated during the kickback as described above to stop the saw chain Third the chain brake may be activated but if the bar is too close to you the brake might not have enough time to slow down and stop the chain before the chain saw hits you Throttle lockout The throttle lockout is designed to prevent accidental operation of the throttle control When you press the lock A i e when you grasp the handle it releases the throttle control B When you release the handle the throttle control and the throttle lockout both move back to their original positions This arrangement means that the throttle control is automatically locked at the idle setting 9 Chain catcher The chain catcher is designed to catch thechain if it snaps or jumps off This should not happen if the chain is properly tensioned see instructions under the heading Assembly and if the bar and chain are properly serviced and maintained see instructions under the heading General working instructions 10 Right hand guard Apart from protecting your hand if the chain jumps or snaps the right hand guard stops branches and twigs from interfering with your grip on the rear handle 11 Vibration damping system Your machine is equipped with a vibration damping system that is designed to minimize vibration and make operation easier The machine s vibration damping system reduces the transfer of vibration between the engine unit cutting equipment and the machine s handle unit The body of the chain saw including the cutting equipment is insulated from the handles by vibration damping units Cutting hardwoods most broadleaf trees creates more vibration than cutting softwoods most conifers Cutting with cutting equipment that is blunt or faulty wrong type or badly sharpened will increase the vibration level WARNING Overexposure to vibration can lead to circulatory damage or nerve damage In people who have Impaired circulation Contact your doctor if you experience symptoms of overexposure to vibration Such symptoms Include numbness loss of feeling tingling pricking pain loss of strength changes in skin colour or condition These symptoms normally appear in the fingers hands or wrists These symptoms may be increased In cold temperatures Stop switch Use the stop switch to switch off the engine 12 Only you and proper working technique can eliminate kickback and Its danger 12 English 1155355 93 Rev 4 2014 11 24

Скачать