Asus rog maximus viii ranger [118/200] Chapter 3

3-42

Chapter 3: BIOS Setup

Chapter 3

The following items appears only when you set the Boot Logo Display item to [Disabled].

Post Report [5 sec]

This item allows you to select a desired waiting time of the POST report from 0 to 10

seconds or until <ESC> is pressed.

The following items appears only when you set the Boot Logo Display item to [Full Screen]

or [Auto].

Post Delay Time [3 sec]

This item allows you to select a desired additional POST waiting time to easily enter

the BIOS Setup. You can only execute the POST delay time during normal boot. The

values range from 0 to 10 seconds.

This feature only works when set under normal boot.

Boot up NumLock State [Enabled]

[Enabled] Set the power-on state of the NumLock to [On].

[Disabled] Set the power-on state of the NumLock to [Off].

Above 4G Decoding [Disabled]

This item enables or disables 64-bit capable devices to be decoded in above 4G address

space if your system supports 64-bit PCI Decoding.

Conguration options: [Enabled] [Disabled]

Wait For ‘F1’ If Error [Enabled]

Enable this item for the system to pause until the F1 key is pressed when any error occurs.

Conguration options: [Disabled] [Enabled]

Option ROM Messages [Enabled]

[Enabled] The Option ROM Messages will be shown during the POST.

[Disabled] Only the ASUS logo will be shown during the POST.

Interrupt 19 Capture [Disabled]

[Enabled] Execute the trap right away.

[Disabled] Execute the trap during legacy boot.

Setup Mode [Advanced Mode]

[Advanced Mode] This item allows you to go to Advanced Mode of the BIOS after POST.

[EZ Mode] This item allows you to go to EZ Mode of the BIOS after POST.