Yamaha CLP-240 [82/90] Clavinova midi format

Yamaha CLP-240 [82/90] Clavinova midi format
CLP-240/230 êÛÍÓ‚Ó‰ÒÚ‚Ó ÔÓθÁÓ‚‡ÚÂÎfl
82
(2) Universal Non-Realtime Message (GM On)
General MIDI Mode On
Data format: [F0H] -> [7EH] -> [XnH] -> [09H] -> [01H] ->
[F7H]
F0H = Exclusive status
7EH = Universal Non-Realtime
7FH = ID of target device
09H = Sub-ID #1=General MIDI Message
01H = Sub-ID #2=General MIDI On
F7H = End of Exclusive
or
F0H = Exclusive status
7EH = Universal Non-Realtime
XnH = When received, n=0~F.
X = don’t care
09H = Sub-ID #1=General MIDI Message
01H = Sub-ID #2=General MIDI On
F7H = End of Exclusive
When the General MIDI mode ON message is received, the
MIDI system will be reset to its default settings.
This message requires approximately 50ms to execute, so
sufficient time should be allowed before the next message is
sent.
8. SYSTEM EXCLUSIVE MESSAGES (XG Standard)
(1) XG Native Parameter Change
Data format: [F0H] -> [43H] -> [1nH] -> [4CH] -> [hhH] ->
[mmH] -> [llH] -> [ddH] -> [F7H]
F0H = Exclusive status
43H = YAMAHA ID
1nH = When received, n=0~F.
When transmitted, n=0.
4CH = Model ID of XG
hhH = Address High
mmH =
Address Mid
llH = Address Low
ddH = Data
|
F7H = End of Exclusive
Data size must match parameter size (2 or 4 bytes).
When the XG System On message is received, the MIDI sys-
tem will be reset to its default settings.
The message requires approximately 50ms to execute, so
sufficient time should be allowed before the next message is
sent.
(2) XG Native Bulk Data (reception only)
Data format: [F0H] -> [43H] -> [0nH] -> [4CH] -> [aaH] ->
[bbH] -> [hhH] -> [mmH] -> [llH] ->[ddH] ->...->
[ccH] -> [F7H]
F0H = Exclusive status
43H = YAMAHA ID
0nH = When received, n=0~F.
When transmitted, n=0.
4CH = Model ID of XG
aaH = ByteCount
bbH = ByteCount
hhH = Address High
mmH =
Address Mid
llH = Address Low
ddH = Data
| |
| |
ccH = Check sum
F7H = End of Exclusive
Receipt of the XG SYSTEM ON message causes reinitializa-
tion of relevant parameters and Control Change values. Allow
sufficient time for processing to execute (about 50 msec)
before sending the CLP-240/230 another message.
XG Native Parameter Change message may contain two or
four bytes of parameter data (depending on the parameter
size).
•For information about the Address and Byte Count values,
refer to Table 1 below. Note that the table’s Total Size value
gives the size of a bulk block. Only the top address of the
block (00H, 00H, 00H) is valid as a bulk data address.
9. SYSTEM EXCLUSIVE MESSAGES
(Clavinova MIDI Format)
Data format:
[F0H] -> [43H] -> [73H] -> [01H] -> [nnH] -> [F7H]
F0H = Exclusive status
43H = Yamaha ID
73H = Clavinova ID
01H = Product ID (CLP common)
nnH = Substatus
nn Control
02H Internal MIDI clock
03H External MIDI clock
F7H = End of Exclusive
10.
SYSTEM EXCLUSIVE MESSAGES (Special Control)
Data format: [F0H] -> [43H] -> [73H] -> [66H] -> [11H] ->
[0nH] -> [ccH] -> [vvH] -> [F7H]
F0H = Exclusive status
43H = Yamaha ID
73H = Clavinova ID
7FH = Extended Product ID
xxH = Product ID 49H
11H = Special control
0nH = Control MIDI change (n=channel number)
cc = Control number
vv = Value
F7H = End of Exclusive
Control 0n ccH vvH
Split Point Always 00H 14H
14H:
Split Key Number
Metronome Always 00H 1BH 00H: No accent
01H-0FH: 1/4-15/4
7FH: off
Damper Level
ch: 00H-0FH 3DH (Sets the Damper Level
for each channel)
00H-7FH
Channel Detune
ch: 00H-0FH 43H (Sets the Detune value
for each channel)
00H-7FH
Voice Reserve
ch: 00H-0FH 45H 00H : Reserve off 7FH
: on*
*
When Volume, Expression is received for Reserve On, they
will be effective from the next Key On. Reserve Off is normal.
11. SYSTEM EXCLUSIVE MESSAGES (Others)
Data format:
[F0H] -> [43H] -> [1nH] -> [27H] -> [30H] -> [00H]
-> [00H] -> [mmH] -> [
ll
H] -> [ccH] -> [F7H]
Master Tuning (XG and last message priority) simultaneously
changes the pitch of all channels.
F0H = Exclusive Status
43H = Yamaha ID
1nH = When received, n=0~F.
When transmitted, n=0.
27H = Model ID of TG100
30H = Sub ID
00H =
00H =
mmH = Master Tune MSB
llH = Master Tune LSB
ccH = don’t care (under 7FH)
F7H = End of Exclusive
CLP240E.book Page 82 Wednesday, April 6, 2005 4:02 PM

Содержание

CLP240E book Page S2 Wednesday April 6 2005 4 02 PM 9 SYSTEM EXCLUSIVE MESSAGES Clavinova MIDI Format 2 Universal Non Realtime Message GM On General MIDI Mode On Data format FOH 7EH XnH 09H 01 H Data format FOH 43H 73H 01 H nnH F7H FOH Exclusive status F7H FOH Exclusive status 43H Yamaha ID 7EH Universal Non Realtime 73H Clavinova ID 01H Product ID CLP common 7FH ID of target device nnH Substatus 09H Sub ID 1 General MIDI Message nn Control 01H Sub ID 2 General MIDI On 02H Internal MIDI clock F7H End of Exclusive 03H External MIDI clock or F7H End of Exclusive FOH Exclusive status 7EH Universal Non Realtime 10 SYSTEM EXCLUSIVE MESSAGES Special Control XnH When received n 0 F Data X don t care format FOH 43H 73H 66H 11H OnH ccH vvH F7H 09H Sub ID 1 General MIDI Message FOH Exclusive status 01H Sub ID 2 General MIDI On 43H Yamaha ID F7H End of Exclusive When the General MIDI mode ON message is received the 73H Clavinova ID 7FH Extended Product ID MIDI system will be reset to its default settings xxH Product ID 49H This message requires approximately 50ms to execute so 11H Special control sufficient time should be allowed before the next message is OnH Control MIDI change n channel number cc Control number sent vv Value 8 SYSTEM EXCLUSIVE MESSAGES XG Standard F7H End of Exclusive 1 XG Native Parameter Change Data format FOH 43H 1 nH 4CH hhH Control On ccH vvH Split Point Always 00H 14H Metronome Always 00H 1BH OOH No accent mmH H ddH F7H 01H 0FH 1 4 15 4 FOH Exclusive status 43H YAMAHA ID Damper Level ch 00H 0FH 1пН When received n 0 F 4CH Model ID of XG Channel Detune ch 00H 0FH hhH Address High mmH Address Mid Voice Reserve ch 00H 0FH H Address Low 43H Sets the Detune value for each channel 00H 7FH 45H OOH Reserve off 7FH on ddH Data When Volume Expression is received for Reserve On they I will be effective from the next Key On Reserve Off is normal F7H End of Exclusive Data size must match parameter size 2 or 4 bytes 11 SYSTEM EXCLUSIVE MESSAGES Others When the XG System On message is received the MIDI sys Data format FOH 43H 1 nH 27H ЗОН ООН tem will be reset to its default settings 00H mmH H ccH F7H The message requires approximately 50ms to execute so sufficient time should be allowed before the next message is Master Tuning XG and last message priority simultaneously sent changes the pitch of all channels FOH Exclusive Status 2 XG Native Bulk Data reception only Data format FOH bbH 43H hhH OnH mmH 4CH H aaH ddH ccH F7H 43H Yamaha ID 1пН When received n 0 F When transmitted n 0 27H Model ID of TG100 43H YAMAHA ID 30H Sub ID 00H OnH When received n 0 F 00H FOH Exclusive status When transmitted n 0 4CH Model ID of XG aaH ByteCount bbH ByteCount hhH Address High mmH Address Mid H Address Low ddH Data I I I I ccH Checksum F7H End of Exclusive Receipt of the XG SYSTEM ON message causes reinitializa tion of relevant parameters and Control Change values Allow sufficient time for processing to execute about 50 msec before sending the CLP 240 230 another message XG Native Parameter Change message may contain two or four bytes of parameter data depending on the parameter size For information about the Address and Byte Count values refer to Table 1 below Note that the table s Total Size value gives the size of a bulk block Only the top address of the block ООН ООН 00H is valid as a bulk data address CLP 240 230 Руководство пользователя 0 7FH off 3DH Sets the Damper Level for each channel 00H 7FH When transmitted n 0 82 14H Split Key Number mmH Master Tune MSB UH Master Tune LSB ccH don t care under 7FH F7H End of Exclusive