Planet IGS-801T [29/120] Snmp configuration

User’s Manual of IGS-801M

4.2.4.2 SNMP Configuration

e management stations. You can also define SNMP Trap destination, SNMP Read/Write Community

tring and system name for the Managed Switch.

Use this page to defin

Figure 4-2-4: SNMP configuration interface

The page includes the following configurable data:

Object Description

SNMP Enable

Enable or Disable the SNMP function of the device. While set to enable, the

manager could remotely get the interface status and received the traps

information.

SNMP Trap Destination

SNMP Trap destination is a management station that receives the trap messages

generated by the switch. If no trap manager is defined, no traps will be issued. To

define a management station as a trap destination, assign an IP address and

enter the SNMP community strings.

SNMP Read Community

Functions as a password and used to authenticate the access right of the device.

The Read Community is restricted to read-only, for all MIBs except the

community table, for which there is no access.

mmunity

Functions as a password and used to authenticate the access right of the device.

The Write Community accesses the device both read and write - configure to the

device via SNMP.

SNMP write Co

SNMP Trap Community

Identifies the community string of the trap manager.

System Name

Defines the user-defined device name.