![Planet IGS-801T [57/120] Understand nomenclature of the managed industrial switch](/img/pdf.png)
Planet IGS-801T [57/120] Understand nomenclature of the managed industrial switch
![Planet IGS-801T [57/120] Understand nomenclature of the managed industrial switch](/views2/1071788/page57/bg39.png)
User’s Manual of IGS-801M
Understand nomenclature of the Managed Industrial Switch
rt on an 802.1Q compliant switch can be configured as tagged or untagged.
enabled will put the VID number, priority and other VLAN information into the
t
will not alter the packet, thus keeping the VLAN information intact. The VLAN information in the
to make
packet-forwarding decisions.
• Untagged:
Ports with untagging enabled will strip the 802.1Q tag from all packets that flow into those
ports. If the packet doesn't have an 802.1Q VLAN tag, the port will not alter the packet. Thus,
all packets received by and forwarded by an untagging port will have no 802.1Q VLAN
information. (Remember that the PVID is only used internally within the Switch). Untagging is
used to send packets from an 802.1Q-compliant network device to a non-compliant network
device.
■ IEEE 802.1Q Tagged and Untagged
Every po
• Tagged:
Ports with tagging
header of all packets that flow into those ports. If a packet has previously been tagged, the por
tag can then be used by other 802.1Q compliant devices on the network
Frame Income
Income Frame is tagged Income Frame is untagged
Frame Leave
Leave port is tagged Frame remains tagged Tag is inserted
Leave port is untagged Tag is removed Frame remain untagged
VLAN Per Port Configuration
The VLAN Port Configuration screen in Figure 4-5-5 appears.
57
Содержание
- Igs 801m 1
- Managed industrial switch 1
- Port 10 100 1000mbps 1
- User s manual 1
- Ce mark warning 2
- Disclaimer 2
- Fcc warning 2
- Revision 2
- Trademarks 2
- User s manual of igs 801m 2
- Weee warning 2
- Installation 11 3
- Introduction 6 3
- Switch management 20 3
- Table of contents 3
- Web configuration 24 3
- Switch operation 107 4
- Appendex c glossary 112 5
- Appendix a rj 45 pin assignment 109 5
- Appendix b troubles shooting 111 5
- High gigabit performance wire speed switching 6
- Introduction 6
- Package contents 6
- Product description 6
- Robust layer 2 features 6
- Tough environmentally hardened design 6
- User s manual of igs 801m 6
- Fast recovery to a redundant ethernet network 7
- Product features 7
- Remote and centralize management installation 7
- User s manual of igs 801m 7
- Product specification 8
- User s manual of igs 801m 8
- 802 p priority 9
- Dscp tos field in ip packet 9
- Level priority for switching 9
- Traffic classification based strict priority and wrr 9
- User s manual of igs 801m 9
- User s manual of igs 801m 10
- Hardware description 11
- Installation 11
- Physical dimension 11
- User s manual of igs 801m 11
- Figure 2 3 top panel of igs 801m 12
- Front rear panel 12
- Top view 12
- User s manual of igs 801m 12
- Bottom view 13
- Figure 2 4 bottom panel of igs 801m 13
- Led indicators 13
- System 13
- User s manual of igs 801m 13
- Port 1 to port 8 10 100 1000base t 14
- User s manual of igs 801m 14
- Din rail mounting 15
- Install the switch 15
- Installation steps 15
- User s manual of igs 801m 15
- User s manual of igs 801m 16
- User s manual of igs 801m 17
- User s manual of igs 801m 18
- Wall mount plate mounting 18
- Wiring the power inputs 18
- 2 3 4 5 6 19
- Power powe 19
- User s manual of igs 801m 19
- Wiring the fault alarm contact 19
- Management methods 20
- Overview 20
- Switch management 20
- User s manual of igs 801m 20
- Web management 20
- Login the switch 21
- User s manual of igs 801m 21
- Planet smart discovery utility 22
- User s manual of igs 801m 22
- User s manual of igs 801m 23
- Main menu 24
- User s manual of igs 801m 24
- Web configuration 24
- System 25
- System info 25
- User s manual of igs 801m 25
- Ystem info 25
- Ip configuration 26
- User s manual of igs 801m 26
- User authentication 27
- User s manual of igs 801m 27
- Snmp overview 28
- User s manual of igs 801m 28
- Snmp configuration 29
- User s manual of igs 801m 29
- Firmware upgrade 30
- User s manual of igs 801m 30
- Configuration download 31
- Configuration upload 31
- User s manual of igs 801m 31
- Configuration upload 32
- User s manual of igs 801m 32
- Factory reset 33
- System reboot 33
- User s manual of igs 801m 33
- User s manual of igs 801m 34
- Fault relay alarm 35
- Figure 4 2 15 fault relay alarm interface 35
- User s manual of igs 801m 35
- Green networking 36
- Logout 36
- User s manual of igs 801m 36
- User s manual of igs 801m 37
- Port configuration 38
- Port management 38
- User s manual of igs 801m 38
- Port statistics 39
- User s manual of igs 801m 39
- User s manual of igs 801m 40
- Port mirroring 41
- User s manual of igs 801m 41
- Cable diagnostics 42
- User s manual of igs 801m 42
- And negative cable terminals ieee std 802 allows for a termination of as 43
- Is reported as falls an anomalous termination 43
- Large as 115ω or as small as 85ω if the termination falls out of this range it 43
- User s manual of igs 801m 43
- Ω differential impedance between the positive 43
- Link aggrega 44
- Link aggregation 44
- User s manual of igs 801m 44
- Port trunk 45
- User s manual of igs 801m 45
- User s manual of igs 801m 46
- Lacp status 47
- User s manual of igs 801m 47
- User s manual of igs 801m 48
- User s manual of igs 801m 49
- Ieee 802 q vlan 50
- Port based vlan 50
- User s manual of igs 801m 50
- Vlan overview 50
- Adding an ieee802 q tag 51
- Anonical format identifier cfi used for encapsulating token ring packets so they can be 51
- Bits of user priority 1 bit of c 51
- Carried across ethernet backbones and 12 bits of the 3 bits of user priority are used by 802 p the vi 51
- Contained in the packet is retained 51
- Identified 51
- Ieee 802 q 802 p tag the tag is contained in the following two octets and consists of 3 51
- Is the vlan identifier and is used by the 802 q standard because the vid is 12 bits long 4094 unique vlan can be 51
- Logical link control because the packet is now a bit longer than it was originally the cyclic redundancy check crc 51
- Must be recalculated 51
- Q vlan tags 51
- S the 802 q vlan tag there are four additional octets inserted after the source mac address 51
- The ether type and vlan id are inserted after the mac source address but before the original ether type length or 51
- The figure below show 51
- The tag is inserted into the packet header making the entire packet longer by 4 octets all of the information originally 51
- Their presence is indicated by a value of 0x8100 in the ether type field when a packet s ether type field is equal to 51
- User s manual of igs 801m 51
- Vlan id vid d 51
- X8100 the packet carries the 51
- Assigning ports to vlans 52
- Default vl 52
- Port vlan id 52
- User s manual of igs 801m 52
- Port overlapping 53
- Untagged vlans 53
- User s manual of igs 801m 53
- Vlan classification 53
- User s manual of igs 801m 54
- Vlan membership 54
- Add a vlan group 55
- User s manual of igs 801m 55
- Modify the vlan group member 56
- Per port configuration 56
- User s manual of igs 801m 56
- Ieee 802 q tagged and untagged 57
- Understand nomenclature of the managed industrial switch 57
- User s manual of igs 801m 57
- User s manual of igs 801m 58
- User s manual of igs 801m 59
- Two separate 802 q 60
- Two separate 802 q vlan 60
- User s manual of igs 801m 60
- Vlan setting example 60
- User s manual of igs 801m 61
- User s manual of igs 801m 62
- Two vlans with overlap area 63
- User s manual of igs 801m 63
- User s manual of igs 801m 64
- User s manual of igs 801m 65
- User s manual of igs 801m 66
- Vlan trunking between two 802 q aware switch 66
- User s manual of igs 801m 67
- Rapid spanning tree 68
- Theory 68
- User s manual of igs 801m 68
- User s manual of igs 801m 69
- User s manual of igs 801m 70
- User s manual of igs 801m 71
- User s manual of igs 801m 72
- User s manual of igs 801m 73
- Rstp system configuration 74
- User s manual of igs 801m 74
- Guration 75
- Rstp port confi 75
- Rstp port configuration 75
- User s manual of igs 801m 75
- User s manual of igs 801m 76
- User s manual of igs 801m 77
- Rstp status 78
- Rstp vlan bridge overview 78
- User s manual of igs 801m 78
- Rstp port status 79
- User s manual of igs 801m 79
- User s manual of igs 801m 80
- Multicast 81
- User s manual of igs 801m 81
- User s manual of igs 801m 82
- User s manual of igs 801m 83
- Delaying member idle member 84
- Non member 84
- User s manual of igs 801m 84
- Igmp snooping configuration 85
- User s manual of igs 801m 85
- Igmp snooping status 86
- User s manual of igs 801m 86
- User s manual of igs 801m 87
- Multicast group table 88
- User s manual of igs 801m 88
- Qos configuratio 89
- Qos configuration 89
- Quality of service 89
- Understand qos 89
- User s manual of igs 801m 89
- P qos mode 90
- User s manual of igs 801m 90
- User s manual of igs 801m 91
- User s manual of igs 801m 92
- Dscp qos mode 93
- User s manual of igs 801m 93
- User s manual of igs 801m 94
- Etwork access control 95
- Overview of 802 x por 95
- T based authentication 95
- User s manual of igs 801m 95
- X network access control 95
- Understanding ieee 802 x port based authentication 96
- User s manual of igs 801m 96
- User s manual of igs 801m 97
- User s manual of igs 801m 98
- Radius server configuration 99
- User s manual of igs 801m 99
- User s manual of igs 801m 101
- X authentication port configuration 101
- User s manual of igs 801m 102
- User s manual of igs 801m 103
- Dynamic ad ss table 104
- Dynamic address table 104
- Mac addresses 104
- User s manual of igs 801m 104
- Static mac address 105
- User s manual of igs 801m 105
- User s manual of igs 801m 106
- Address table 107
- For filtering 107
- Forwarding filtering 107
- Learning 107
- Store and forward 107
- Switch operation 107
- User s manual of igs 801m 107
- Warding 107
- Auto negotiation 108
- User s manual of igs 801m 108
- A 10 100mbps 10 100base tx 109
- A switch s rj 45 pin assignments 109
- Appendix a rj 45 pin assignment 109
- Switch s rj 45 pin assignments 109
- User s manual of igs 801m 109
- User s manual of igs 801m 110
- Appendix b troubles shooting 111
- User s manual of igs 801m 111
- Appendex c glossary 112
- User s manual of igs 801m 112
- User s manual of igs 801m 113
- User s manual of igs 801m 114
- User s manual of igs 801m 115
- User s manual of igs 801m 116
- User s manual of igs 801m 117
- User s manual of igs 801m 118
- User s manual of igs 801m 119
- Ec declaration of conformity 120
- Planet technology corporation 120
Похожие устройства
- Xerox WorkCentre 6015NI Инструкция по эксплуатации
- Elna 6200 Инструкция по эксплуатации
- Planet ISW-500 Инструкция по эксплуатации
- Xerox 7600i Инструкция по эксплуатации
- Elna 7300 - PRO QUILTING QUEEN Инструкция по эксплуатации
- Planet ISW-501T Инструкция по эксплуатации
- Elna EXCELLENCE 740 Инструкция по эксплуатации
- Planet ISW-511S15 Инструкция по эксплуатации
- HP CB317HE 301 (№178) Инструкция по эксплуатации
- Elna LOTUS Инструкция по эксплуатации
- Planet ISW-621 Инструкция по эксплуатации
- HP CB318HE 301 (№178) Инструкция по эксплуатации
- Elna 8600 XPLORE Инструкция по эксплуатации
- Planet ISW-621S15 Инструкция по эксплуатации
- HP CB319HE 301 (№178) Инструкция по эксплуатации
- Elna 664 Инструкция по эксплуатации
- Planet ISW-800 Инструкция по эксплуатации
- HP CB320HE 301 (№178) Инструкция по эксплуатации
- Elna 664 PRO Инструкция по эксплуатации
- Planet ISW-801T Инструкция по эксплуатации