Honda TRANSALP XL600-650V (1987-2002) [182/291] Inspection

Содержание

Похожие устройства

6 24 Frame suspension and final drive 14 6 Remove the chain slider arrowed if required 14 8 Do not forget the collar s where fitted Installation 7 Remove the dust cap and or collar where fitted according to model from each swingarm pivot then withdraw the spacers noting what fits where see illustrations Clean off all old grease then lubricate the grease seals bearings collars spacers and the pivot bolt with multi purpose grease Insert the spacers then fit the collars and or caps according to model 8 If removed install the chain slider making sure it locates correctly then fit the collar s and tighten the screw s securely see illustration 9 Offer up the swingarm and have an assistant hold it in place see illustration 14 5e Make sure the drive chain is looped over the front of the swingarm and the brake hose is correctly routed as noted on removal Slide the pivot bolt through from the left hand 14 13a Make sure the brake caliper locates correctly arrows XL600V 14 7a Remove the dust cap 14 7b and withdraw the spacer XL600V shown 14 9 Slide the pivot bolt through the swingarm 14 10 Tighten the pivot bolt nut to the specified torque side and push it all the way through see illustration 10 Fit the washer where removed and the nut see illustration 14 5c Counter hold the head of the pivot bolt and tighten the nut to the specified torque setting see Illustration 11 Align the swingarm with the suspension linkage arm then install the bolt and tighten the nut securely see illustration 12 5a 12 5c or 11 11 Fit the pivot caps 12 Install the chain guard making sure It locates correctly and tighten the bolts securely see illustration 16 14 14 3a and 14 3b 13 Fit the rear brake caliper and bracket assembly onto the swingarm making sure it locates correctly and the hose is correctly routed see illustrations Fit the brake hose guides and tighten their bolts securely see illustrations 14 2a b and c 14 Install the rear wheel see Chapter 7 15 Check and adjust the drive chain slack see Chapter 1 Check the operation of the rear suspension and brake before taking the machine on the road 1 Remove the swingarm see Section 14 Remove the chain adjusters If required noting how they fit especially the UP mark on XL models see illustration 2 Thoroughly clean the swingarm removing all traces of dirt corrosion and grease 3 Inspect the swingarm closely looking for 14 13b Make sure the brake caliper locates correctly arrow XL650V 14 13c Make sure the brake caliper locates correctly arrows XRV750 15 Swingarm Inspection bearing check ÿ and replacement Inspection