Honda TRANSALP XL600-650V (1987-2002) [218/291] Bodywork 8 7

Содержание

Похожие устройства

Bodywork 8 7 5 10a Undo the screws and remove the rubber collars 5 14b then release the outer cable from the bracket Windshield 10 Undo the screws securing the windshield to the fairing and remove the washers and rubber collars see illustration Carefully lift 5 10b then remove the windshield 5 14c and the inner cable end from the lever 5 19a Remove the trim clips then release the tabs the windshield out noting how its tabs on the bottom at the front locate see illustration 11 Installation is the reverse of removal Make sure it locates properly 17 Installation is the reverse of removal Replace the rubbers with new ones if they are damaged deformed or deteriorated Make sure the collars are fitted in the rubbers Side panels 12 Remove the seat see Section 2 13 To remove the right hand panel undo the three screws and remove it see illustration 5 14a 14 To remove the left hand panel undo the three screws securing the side panel then draw the panel away and release the seat lock cable from the bracket and the lever see illustrations 15 Installation is the reverse of removal Belly pan 5 19b and remove the stone guard 5 14a Undo the screws arrowed 16 Undo the five screws and the bolt and remove the belly pan Stone guard 18 Release and withdraw the two trim clips on each side 19 Manoeuvre the panel to release the side tabs from the fairing and the centre tabs on the top from the frame see illustrations 20 Installation is the reverse of removal Luggage rack and tail light cover 21 Remove the seat see Section 2 and the side panels see above 22 Unscrew the four bolts securing the rack noting the collars and remove the rack noting how it fits see illustrations 8 5 22a Unscrew the bolts 5 22b noting the collars 5 22c and remove the rack