Honda TRANSALP XL600-650V (1987-2002) [219/291] 8 bodywork

Содержание

Похожие устройства

8 8 Bodywork 23 Lift the tail light cover off the rear sub frame see illustration Note the collars in the cover and remove them for safekeeping if they are loose 24 Installation is the reverse of removal Make sure the all the collars are fitted in the tail light cover and with the rack bolts the fairing side panels Support the fairing then unscrew the four nuts securing it to the bracket and draw it forwards off the headlight assembly 6 On P models onward 1993 on remove the fairing side panels see above Undo the rearmost windshield screw on each side see illustration Unscrew the bolt on each side at the bottom see illustration Support the fairing and remove the central screw at the front then draw the fairing forwards off the headlight assembly see illustration 7 Installation is the reverse of removal 6 Fairing and body panels removal and installation XRV750 models Cockpit trim panel s L to N 1990 to 1992 models only 1 There is a panel on each side each secured by three screws with the rearmost screws having washers and nuts on the underside of the panel Undo the screws counter holding the nuts and taking care not to lose them or the washers when removing the rear screws and remove the panel noting how it fits Fairing side panels 2 On L to N 1990 to 1992 models undo the three screws securing the panel to the fairing and the trim panel then release the quick release screws by turning them 1 4 turn anti clockwise and remove the panel noting how it fits 3 On P models onward 1993 on undo the three screws securing the panel to the fairing the two screws securing the panel to the fuel tank and the single screw securing the panel to the stone guard and remove the panel noting how it fits see illustrations 4 Installation is the reverse of removal Fairing 5 On L to N 1990 to 1992 models undo the two screws securing the fairing on each side to 6 3a Undo the fairing screws A the fuel tank screws B 6 3c and remove the panel Windshield 5 23 and the tail light cover 8 Undo the screws securing the windshield to the fairing and remove the washers then carefully remove the windshield noting how it fits see illustration 9 Installation is the reverse of removal Make sure the cutout on each side locates correctly between the fairing and bracket Side panels 10 On L to N 1990 to 1992 models undo the two screws then carefully draw the panel away to release the pegs from the grommets 11 On P models onward 1993 on undo the two screws then carefully draw the panel 6 3b and the stone guard screw arrowed 6 6a Undo the windshield screws A and the front screw B 6 6b and the bolt arrowed on each side