Honda TRANSALP XL600-650V (1987-2002) [134/291] Fuel and exhaust systems 4 7

Содержание

Похожие устройства

Fuel and exhaust systems 4 7 4 3a Make sure the tab locates correctly arrow 4 3b Make sure the ducts are correctly positioned 4 5b Hose unions A clamps B the tab on the air filter housing in the slot in the joint piece see illustration Make sure the intake ducts to the carburettors are correctly orientated see illustration Tighten all clamps screws securely Air filter housing XL650V and XRV750 P models onwards 1993 on Removal XL650V models 4 Remove the fuel tank see Section 2 5 Release the clamp securing the hose to the sub air cleaner and detach it see illustration Also detach the PAIR system crankcase 4 10 Slacken the clamp screws arrowed 4 5a Detach the hose arrowed from its union 4 9 Detach the hoses arrowed from their unions breather and drain hoses from the front middle and back of the housing if you find them difficult to access do this as they become accessible after lifting the housing off the carburettors see illustration 6 Slacken the clamp screws securing the air filter housing to the carburettor intakes see illustration 4 5b 7 Unscrew the bolt securing the front of the air filter housing to the frame then carefully lift the housing up off the carburettors noting how it fits see illustration 4 5b Removal XRV750 models 8 Remove the fuel tank see Section 2 4 1 la Unscrew the bolt at the front A and the bolt on each side B 9 Release the clamps and detach the crank case breather and drain hoses from the housing see illustration 10 Slacken the clamp screws securing the air filter housing to the carburettor intakes see illustration 11 Unscrew the bolts securing the front and sides of the air filter housing to the frame then carefully lift the housing up off the carburettors noting how it fits see illustrations Installation all models 12 Installation is the reverse of removal Make sure all the hoses are correctly installed and secured by their clamps 4 11b and remove the housing 4