Honda TRANSALP XL600-650V (1987-2002) [176/291] 18 frame suspension and final drive

Содержание

Похожие устройства

6 18 Frame suspension and final drive XL600V models 3 Remove the right hand side panel see Chapter 8 4 Unscrew the nut and withdraw the bolt securing the linkage rods to the linkage arm then swing the rods down see illustration Unscrew the nut and withdraw the bolt securing the bottom of the shock absorber to the linkage arm see illustration 5 Unscrew the nut on the shock absorber upper mounting bolt see illustration Support the shock absorber then withdraw the bolt and manoeuvre the shock out of the bottom see illustrations XL650V models 11 4a On XL600V models unscrew the nut and withdraw the linkage rods to arm bolt 11 4b Unscrew the nut and withdraw the lower mounting bolt 6 Remove the seat and the side panels see Chapter 8 7 Undo the screws securing the mud deflector just behind the shock absorber and remove it Unscrew the nut and withdraw the bolt securing the bottom of the shock absorber to the linkage arm see illustration 8 Unscrew the nut on the shock absorber upper mounting bolt see illustration Support the shock absorber then withdraw the bolt and manoeuvre the shock out of the left hand side of the bike XRV750 models 9 Remove the side panels see Chapter 8 10 Displace the fuel pump from its mount there is no need to detach the hoses or dis connect the wiring connector see illustration 11 5a Unscrew the nut on the bolt arrowed Slacken the reservoir clamp screw and draw the reservoir out of the clamp see illustration 11 5c and remove the shock absorber from the bottom 11 8 Unscrew the nut A then withdraw the bolt B 11 5b then withdraw the bolt 11 Unscrew the nut and withdraw the bolt securing the linkage rods to the linkage arm 11 7 On XL650V models unscrew the nut arrowed and withdraw the lower mounting bolt 11 10a On XRV750 models displace the fuel pump from its mount 11 10b Slacken the clamp screw arrowed and draw the reservoir out