Honda AFRICA TWIN XRV750 (1987-2002) [131/291] 4 fuel and exhaust systems
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Honda AFRICA TWIN XRV750 (1987-2002) [131/291] 4 fuel and exhaust systems

Honda AFRICA TWIN XRV750 (1987-2002) [131/291] 4 fuel and exhaust systems

Содержание

Похожие устройства

4 4 Fuel and exhaust systems 2 9 Detach the fuel hose A and the vacuum hose B 2 10 Unscrew the bolt arrowed then raise the tank at the rear 2 11b and draw it out from under the frame rail 2 11c Detach the overflow and breather hoses A from their unions B 9 Release the fuel hose clamp and detach the hose from the tap see illustration Release the vacuum hose clamp and detach the hose from the tap 10 Unscrew and remove the fuel tank mounting bolt see illustration 11 Raise the tank at the rear and support it using a block of wood if required Disconnect the fuel level sensor wiring connector then carefully draw the wiring under the frame tube noting its routing see illustrations Also disconnect the overflow and breather hoses from their unions on the tank noting which fits where see illustration 12 Remove the tank by carefully drawing it back and away from the bike see illustration Take care not to lose the mounting rubbers from the rear of the tank and from between the sides of the tank and the frame noting how they fit 13 Check the tank mounting rubbers for damage or deterioration and replace them with new ones if necessary 2 17a Undo the screws Removal XRV750 models 14 Make sure the fuel tap is turned to the 2 17b and remove the cover 2 17c Undo the screw 2 11a Disconnect the wiring connector arrowed 2 12 Carefully remove the tank OFF position Make sure the fuel cap is secure 15 Remove the seat and the fairing side panels see Chapter 8 16 On L to N 1990 to 1992 models disconnect the fuel level sensor wiring connector located below the tank on the left hand side 17 On P models onward 1993 on undo the screws securing the air filter housing cove noting which fit where and remove it see illustrations Also undo the screw in the centre of the fuel tap knob and remove the knob see illustrations Unscrew and remove the fuel tank mounting bolts see illustration Remove the tank prop from under the seat then raise the tank at the rear and insert the prop between the tank and its bracket using the bolt holes in each as anchors for the support see illustrations 2 17d and remove the knob

Скачать