Honda AFRICA TWIN XRV750 (1987-2002) [237/291] 16 electrical system

Содержание

Похожие устройства

9 16 Electrical system 15 11c Displace the cluster and unscrew the speedometer cable retaining ring arrowed cluster noting how it fits and unscrew the knurled ring securing the speedometer cable as it becomes accessible see illustrations 12 To remove the digital trip meter trace the wiring from the cluster and disconnect it at the connector see illustration Unscrew the two nuts noting the washers and remove the meter noting how it fits 13 Installation is the reverse of removal Check the rubber grommets for damage deformation and deterioration and replace them with new ones if necessary Make sure that the wiring connectors are correctly routed and secured 15 12 Disconnect the wiring connector A then unscrew the nuts B Speedometer cable Removal 14 Remove the fairing see Chapter 8 15 Unscrew the knurled ring securing the speedometer cable in the instrument cluster and detach the cable noting how it fits see illustration 15 2 or 15 11c 16 Undo the screw securing the lower end of the speedometer cable in the drive housing on the right hand side of the front wheel and detach the cable noting how it locates see illustration 17 Release the cable from its ties and guides see illustration Withdraw the cable from the motorcycle noting its routing Installation 18 Route the cable correctly between the instrument cluster and the front wheel and secure It in the guides and ties see illustration 19 Connect the cable upper end to the instrument cluster and tighten the knurled ring securely see illustration 15 2 or 15 11c 20 Fit the lower end of the cable Into the drive housing on the right hand side of the front wheel aligning the slot in the cable end with the drive tab and secure it with its screw see illustrations 21 Check that the cable doesn t restrict steering movement or interfere with any other components 16 Instruments check and replacement XL600V models Speedometer check 15 16 Undo the screw arrowed and detach the cable 15 17 Slacken the screw arrowed and free the cable from the guide 1 Special instruments are required to properly check the operation of the meter itself If there