Honda AFRICA TWIN XRV750 (1987-2002) [178/291] 20 frame suspension and final drive

Содержание

Похожие устройства

6 20 Frame suspension and final drive 11 20 Shock absorber components XRV750 7 Locknut 2 Adjuster nut 3 Spring 4 Seal 5 Spring seat 6 Spring guide 19 On XL650V models individual com ponents are not available for the shock absorber so if it is worn or damaged it must be replaced with a new one 20 On XRV750 L to N 1990 to 1992 the shock absorber can be disassembled and components renewed in the same way as for the XL600V see Step 8 see illustration On all other XRV750 models individual com ponents are not available 21 Honda advise that the pressurised 7 Damper unit 8 Rubber damper 9 Locknut nitrogen gas should be released before discarding the shock absorber Take the shock absorber to a Honda dealer for disposal do not attempt gas dispersal yourself Installation 22 Installation is the reverse of removal noting the following Apply multi purpose grease to the shock absorber and linkage plate pivot points On XL600V and XRV750 L to N 1990 to 1992 models install the shock absorber with 10 Stopper plate 11 Lower mount the breather tube facing the front On XL650V models make sure the reservoir is on the left hand side On XRV750 P models onward 1993 on make sure the reservoir hose is on the left and on the right on all other XRV models Do not tighten the nuts until both bolts or all components if the suspension linkage has been removed as well are in position then tighten them to the torque setting specified at the beginning of the Chapter