Honda AFRICA TWIN XRV750 (1987-2002) [217/291] 6 bodywork

Содержание

Похожие устройства

8 6 Bodywork 5 3a Undo the screws on each side 5 3b Pull the sides off the tank to release the pegs arrowed from the grommets 3 Undo the two screws on each side noting which fits where see illustration Carefully pull the fairing away from the tank on each side to release the pegs from the grommets see illustration Remove the panel noting how It fits see illustration 4 Installation is the reverse of removal The self tapping screws fit in the upper holes and the normal screws in the lower holes see illustration 5 3a 5 3c Manoeuvre the trim panel off the instrument cluster and out of the fairing 5 6 Either disconnect the wiring connector arrowed or release the bulbholder 5 8b noting how the peg A locates in the grommet B 6 Either disconnect the turn signal wiring connectors or release each bulbholder from the turn signals by twisting them anti clockwise see illustration 7 Unscrew the two bolts on the top see illustration and the bolt on each side at the bottom see illustration 5 1 8 Draw the fairing forwards noting how the lugs locate in the grommets in the bracket then disconnect the headlight and sidelight Fairing wiring connectors as they become accessible 5 Remove the windshield the cockpit trim panel see illustrations and the stone guard see below and above 9 Installation is the reverse of removal 5 7 Unscrew the two bolts arrowed 5 8c and disconnect the headlight wiring connector 5 8a Draw the fairing forward 5 8d and the sidelight wiring connector