Honda AFRICA TWIN XRV750 (1987-2002) [142/291] Fuel and exhaust systems 4 15
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Honda AFRICA TWIN XRV750 (1987-2002) [142/291] Fuel and exhaust systems 4 15

Honda AFRICA TWIN XRV750 (1987-2002) [142/291] Fuel and exhaust systems 4 15

Содержание

Похожие устройства

Fuel and exhaust systems 4 15 9 4 then undo the joining screws or bolts arrow XL600V type carburettor shown 10 1a Fit the O ring making sure the flat side is on the inside sure to use the new O rings seals and other On XL models and XRV750 L to N 1990 to parts supplied in the rebuild kit Do not 1992 models install the synchronisation overtighten the carburettor jets and screws as spring after the carburettors are joined they are easily damaged together Make sure it is correctly and 1 On XL models and XRV750 L to N 1990 squarely seated see illustration 9 3b to1992 models fit a new air cut off valve Check the operation of the throttle linkage ensuring that it operates smoothly and returns O ring making sure its flat side faces against the carburettor see illustration and 8 1a Fit quickly under spring pressure the air cut off valve diaphragm making sure Install the carburettors see Section 7 and the pointed centre fits into the passage and it check carburettor synchronisation and idle is properly seated see illustration Fit the speed see Chapter 1 spring between the cover and the diaphragm see illustration then locate the cover and 10 Carburettors tighten its screws securely not forgetting the reassembly and hose union retainer plate where fitted see float height check illustration 8 12a 2 On XRV750 P models onwards 1993 on fit the air jet and air cut off valve using new Warning Refer to the precautions O rings and secure the assembly with its given in Section 1 before screws see illustration 8 1b Connect the proceeding Note When reassembling the carburettors be hose onto the union on the air cut off valve A 10 1c then fit the spring and cover 10 6 Install the pilot jet 10 4 Fit the needle valve seat with its washer 10 7a the needle jet 10 1b Locate the diaphragm 3 Install the pilot screw if removed along with its spring washer and O ring turning it in until it seats lightly see illustration 5 1a or b Now turn the screw out the number of turns previously recorded or as specified at the beginning of the Chapter 4 On XL models and XRV750 L to N 1990 to1992 models install the float needle valve seat with its washer making sure the filter is attached see illustration 5 Hook the float needle valve onto the float tab see illustration Position the float assembly in the carburettor and install the pin making sure it is secure see illustrations 8 10b and a 6 Screw the pilot jet into the body of the carburettor see illustration 7 Screw the needle jet into the body of the carburettor see illustration Screw the mam jet into the end of the needle jet see illustration 10 5 Hook the valve onto its tab 10 7b and the main jet

Скачать