Honda AFRICA TWIN XRV750 (1987-2002) [181/291] Frame suspension and final drive 6 23

Содержание

Похожие устройства

Frame suspension and final drive 6 23 14 2a Unscrew the brake hose guide bolts arrowed 14 2b even the hidden ones XL600V shown 14 2c On XL650V models release the hose from its guides 14 3a Chainguard bolts arrowed XL600V 14 3b Chainguard bolts arrowed XRV750 14 5a Remove the swingarm pivot cap to access the pivot bolt head and nut arrowed 6 Remove the chain slider from the swingarm if necessary noting how it fits see illustration If it is badly worn or damaged see Chapter 1 Section 1 it should be replaced with a new one Inspect all pivot components for wear or damage as described In Section 15 14 Swingarm removal and installation Removal 1 Remove the rear wheel see Chapter 7 2 Unscrew the bolt s securing each rear brake hose guide to the swingarm see illustrations or release the hose from its guides according to model see illustration Note the routing of the brake hose around the swingarm as an aid to installation Displace the rear brake caliper and bracket assembly from the swingarm there is no need to disconnect the brake hose noting how it locates and how the hose routes and tie it to the frame making sure no strain is placed on the hoses see illustration 3 Unscrew the bolts securing the chain guard to the swingarm and remove the guard noting how it locates see illustrations 4 Support the swingarm then unscrew the nut and withdraw the bolt securing the suspension linkage arm to the swingarm see illustration 12 5a 12 5c or 11 11 5 Remove the swingarm pivot caps Unscrew the nut on the right hand end of the swingarm pivot bolt and remove the washer if fitted see illustration Support the swingarm then withdraw the pivot bolt from the left hand side see illustration Manoeuvre the swingarm clear of the shock absorber and out of the frame see illustration 14 5b Swingarm pivot cap XL650V 14 5d withdraw the bolt 14 5c Unscrew the nut 14 5e and remove the swingarm