Honda AFRICA TWIN XRV750 (1987-2002) [154/291] 4 ignition system

Содержание

Похожие устройства

5 4 Ignition system 3 18a Rear cylinder HT coil mounting bolts A front cylinder coil B XL600V single coil per cylinder models 3 18c Rear cylinder HT coil arrowed XL650V 3 18b Front cylinder HT coil arrowed XL650V 3 18d Front cylinder HT coil arrowed XRV single coil per cylinder models Installation 3 20 Note the markings as described and make sure all leads are correctly connected 4 1 Remove the heat shield 19 Installation is the reverse of removal 20 On models with two coils per cylinder note that each coll is marked according to the spark plug it feeds e g a coil marked FR R is for the front cylinder right hand spark plug On models with one coil per cylinder note that each HT lead is marked according to the spark plug it feeds e g a lead marked FR R is for the front cylinder right hand spark plug see illustration 21 Make sure the wiring connectors and HT leads are securely connected on single HT lead colls the black blue front and black 4 2a Pulse generator coil wiring connector XL600V 3 18e Rear cylinder HT coil arrowed XRV single coil per cylinder models yellow rear primary circuit wire connectors are for the black terminals on the coils the green wire connectors are for the green terminals On twin HT lead coils the black white wire connectors are for the black terminals and ths blue yellow front or yellow blue rear wire connectors are for the green terminals 4 Pulse generator coil s check removal and installation I1 Check 1 On XL and XRV750 L to N 1990 to 1992 I models remove the fuel tank see Chapter 4 On XRV750 P models onwards 1993 on remove the left hand side panel On XL650V remove the left hand heat shield see illustration 2 Trace the wiring back from the coil s mounted in the clutch cover on the right hand I side of the engine on XL models and In Ihe alternator cover on the left hand side on XRV models to its wiring connector and I disconnect it see illustrations Perform the following check s 3 Using an ohmmeter check for continuity I between each of the connector terminals on the coil side of the connector and earth I