Honda AFRICA TWIN XRV750 (1987-2002) [216/291] Bodywork 8 5

Содержание

Похожие устройства

Bodywork 8 5 4 14a Unscrew the bolt 4 16 Removing the belly pan Side panels 14 Unscrew the single bolt on the bottom of the panel then carefully draw the panel away to release the pegs from the grommets see illustrations 15 Installation is the reverse of removal Belly pan 16 Undo the three screws and the two bolts and remove the belly pan see illustration 17 Installation is the reverse of removal Replace the rubbers with new ones if they are 4 14b and release the pegs from the grommets arrowed 4 18a Unscrew the cable holder bolt damaged deformed or deteriorated Make sure the collars are fitted in the rubbers Stone guard 18 Unscrew the bolt securing the clutch cable holder to the clutch cover then detach the cable end from the release arm noting how it fits see illustrations Draw the cable out of the guard noting its routing 19 Unscrew the two bolts in the middle then lift the guard to release the tab on the bottom from the hook on the frame see illustration 20 Installation is the reverse of removal 4 18b and release the cable end from the arm 5 Fairing and body panels removal and installation XL650V models Cockpit trim panel 1 Remove the top windshield screw on each side see below Unscrew the lower fairing bolt on each side see illustration 2 Release and withdraw the trim clip on each side securing the trim panel to the fairing inner panels see illustration 8 4 19 Unscrew the bolts A and release the tab B 5 1 Unscrew the fairing bolt arrowed on each side 5 2 Release the trim clip arrowed on each side